Skip to content

Zoom L6: MIDI CC, NRPN and OSC map

The Zoom L6 as named OSC addresses — 65 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Zoom L6
Vendor Zoom
OSC prefix /l6
Source 🎛️ Derived from an Electra One community preset
Revision per Electra preset
Upstream electra-preset
Driver file devices/zoom/l6.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/zoom/l6.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /l6/level_1 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as l6: ask “what can the Zoom L6 do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (65)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/l6/level_1 83 0–127 continuous
/l6/level_2 84 0–127 continuous
/l6/level_3 85 0–127 continuous
/l6/level_4 86 0–127 continuous
/l6/level_5 87 0–127 continuous
/l6/level_6 88 0–127 continuous
/l6/pan 73 -10–10 continuous
/l6/pan 74 -10–10 continuous
/l6/pan 75 -10–10 continuous
/l6/pan 76 -10–10 continuous
/l6/pan 77 -10–10 continuous
/l6/pan 78 -10–10 continuous
/l6/aux_1 43 0–127 continuous
/l6/aux_1 44 0–127 continuous
/l6/aux_1 45 0–127 continuous
/l6/aux_1 46 0–127 continuous
/l6/aux_1 47 0–127 continuous
/l6/aux_1 48 0–127 continuous
/l6/aux_2 53 0–127 continuous
/l6/aux_2 54 0–127 continuous
/l6/aux_2 55 0–127 continuous
/l6/aux_2 56 0–127 continuous
/l6/aux_2 57 0–127 continuous
/l6/aux_2 58 0–127 continuous
/l6/fx 63 0–127 continuous
/l6/fx 64 0–127 continuous
/l6/fx 65 0–127 continuous
/l6/fx 66 0–127 continuous
/l6/fx 67 0–127 continuous
/l6/fx 68 0–127 continuous
/l6/mute 93 0–127 continuous
/l6/mute 94 0–127 continuous
/l6/mute 95 0–127 continuous
/l6/mute 102 0–127 continuous
/l6/mute 103 0–127 continuous
/l6/mute 104 0–127 continuous
/l6/high 1 -15–15 continuous
/l6/high 2 -15–15 continuous
/l6/high 3 -15–15 continuous
/l6/high 4 -15–15 continuous
/l6/high 5 -15–15 continuous
/l6/high 6 -15–15 continuous
/l6/mid 21 -15–15 continuous
/l6/mid 22 -15–15 continuous
/l6/mid 23 -15–15 continuous
/l6/mid 24 -15–15 continuous
/l6/mid 25 -15–15 continuous
/l6/mid 26 -15–15 continuous
/l6/freq 11 0–127 continuous
/l6/freq 12 0–127 continuous
/l6/freq 13 0–127 continuous
/l6/freq 14 0–127 continuous
/l6/freq 15 0–127 continuous
/l6/freq 16 0–127 continuous
/l6/low 33 -15–15 continuous
/l6/low 34 -15–15 continuous
/l6/low 35 -15–15 continuous
/l6/low 36 -15–15 continuous
/l6/low 37 -15–15 continuous
/l6/low 38 -15–15 continuous
/l6/mono_x2 109 0–127 continuous
/l6/mono_x2 110 0–127 continuous
/l6/usb_1_2 113 0–127 continuous
/l6/usb_3_4 114 0–127 continuous
/l6/compressor 119 0–127 continuous

Performance MIDI

Notes, pitch bend and any CC are also available: /l6/note/on <note> <velocity>, /l6/cc/<number> <value>, /l6/pitchbend <0-16383>, /l6/program_change <n>.

Limitations

Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.