Studio Electronics SE OMEGA/CODE: MIDI CC, NRPN and OSC map¶
The Studio Electronics SE OMEGA/CODE as named OSC addresses — 48 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Studio Electronics SE OMEGA/CODE |
|---|---|
| Vendor | Studio Electronics |
| OSC prefix | /se_omega_code |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/studio-electronics/se_omega_code.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/studio-electronics/se_omega_code.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as se_omega_code: ask “what can the Studio Electronics SE OMEGA/CODE do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (48)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/se_omega_code/frequency |
54 | -63–63 | continuous | ||
/se_omega_code/sinus |
55 | 0–127 | continuous | ||
/se_omega_code/saw |
56 | 0–127 | continuous | ||
/se_omega_code/pulse |
57 | 0–127 | continuous | ||
/se_omega_code/sub_osc |
58 | 0–127 | continuous | ||
/se_omega_code/pw |
59 | 0–127 | continuous | ||
/se_omega_code/frequency |
60 | -63–63 | continuous | ||
/se_omega_code/triange |
61 | 0–127 | continuous | ||
/se_omega_code/saw |
62 | 0–127 | continuous | ||
/se_omega_code/pulse |
63 | 0–127 | continuous | ||
/se_omega_code/osc_sync |
118 | 0–127 | continuous | ||
/se_omega_code/pw |
70 | 0–127 | continuous | ||
/se_omega_code/osc1 |
84 | 0–127 | continuous | ||
/se_omega_code/osc2 |
85 | 0–127 | continuous | ||
/se_omega_code/noise |
86 | 0–127 | continuous | ||
/se_omega_code/xmod |
87 | 0–127 | continuous | ||
/se_omega_code/rate |
71 | 0–127 | continuous | ||
/se_omega_code/depth |
72 | 0–127 | continuous | ||
/se_omega_code/vcf1_freq |
88 | 0–127 | continuous | ||
/se_omega_code/vcf1_reso |
89 | 0–127 | continuous | ||
/se_omega_code/vcf2_f_ext_in |
98 | 0–127 | continuous | ||
/se_omega_code/vcf2_r_exttrg |
99 | 0–127 | continuous | ||
/se_omega_code/vcf_evn1_amt |
102 | 0–127 | continuous | ||
/se_omega_code/filter_type |
116 | 0–127 | continuous | ||
/se_omega_code/attack |
103 | 0–127 | continuous | ||
/se_omega_code/decay |
104 | 0–127 | continuous | ||
/se_omega_code/sustain |
105 | 0–127 | continuous | ||
/se_omega_code/release |
106 | 0–127 | continuous | ||
/se_omega_code/rate |
73 | 0–127 | continuous | ||
/se_omega_code/attack |
107 | 0–127 | continuous | ||
/se_omega_code/decay |
108 | 0–127 | continuous | ||
/se_omega_code/sustain |
109 | 0–127 | continuous | ||
/se_omega_code/release |
110 | 0–127 | continuous | ||
/se_omega_code/depth |
74 | 0–127 | continuous | ||
/se_omega_code/attack |
112 | 0–127 | continuous | ||
/se_omega_code/decay |
113 | 0–127 | continuous | ||
/se_omega_code/sustain |
114 | 0–127 | continuous | ||
/se_omega_code/release |
115 | 0–127 | continuous | ||
/se_omega_code/evn3_amt |
111 | 0–127 | continuous | ||
/se_omega_code/freq_down |
75 | 0–127 | continuous | ||
/se_omega_code/freq_up |
78 | 0–127 | continuous | ||
/se_omega_code/env1_up |
76 | 0–127 | continuous | ||
/se_omega_code/res_up |
79 | 0–127 | continuous | ||
/se_omega_code/invert |
77 | 0–127 | continuous | ||
/se_omega_code/d_down |
80 | 0–127 | continuous | ||
/se_omega_code/env1_delay |
81 | 0–127 | continuous | ||
/se_omega_code/vcf_keytrack |
90 | 0–127 | continuous | ||
/se_omega_code/volume |
7 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /se_omega_code/note/on <note> <velocity>, /se_omega_code/cc/<number> <value>, /se_omega_code/pitchbend <0-16383>, /se_omega_code/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.