Studio Electronics SE-1X: MIDI CC, NRPN and OSC map¶
The Studio Electronics SE-1X as named OSC addresses — 50 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Studio Electronics SE-1X |
|---|---|
| Vendor | Studio Electronics |
| OSC prefix | /se_1x |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/studio-electronics/se_1x.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/studio-electronics/se_1x.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as se_1x: ask “what can the Studio Electronics SE-1X do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (50)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/se_1x/modwheel |
1 | 0–127 | continuous | ||
/se_1x/volume |
7 | 0–127 | continuous | ||
/se_1x/osc1_freq |
54 | 0–127 | continuous | ||
/se_1x/osc1_tri_on_off |
55 | 0–127 | continuous | ||
/se_1x/osc1_saw_on_off |
56 | 0–127 | continuous | ||
/se_1x/osc1_squ_on_off |
57 | 0–127 | continuous | ||
/se_1x/osc1_pulse_width |
58 | 0–127 | continuous | ||
/se_1x/osc2_freq |
59 | 0–127 | continuous | ||
/se_1x/osc2_tri_on_off |
60 | 0–127 | continuous | ||
/se_1x/osc2_saw_on_off |
61 | 0–127 | continuous | ||
/se_1x/osc2_squ_on_off |
62 | 0–127 | continuous | ||
/se_1x/osc2_pulse_width |
63 | 0–127 | continuous | ||
/se_1x/osc3_freq |
70 | 0–127 | continuous | ||
/se_1x/osc3_tri_on_off |
71 | 0–127 | continuous | ||
/se_1x/osc3_saw_on_off |
72 | 0–127 | continuous | ||
/se_1x/osc3_squ_on_off |
73 | 0–127 | continuous | ||
/se_1x/osc3_pulse_width |
74 | 0–127 | continuous | ||
/se_1x/lfo1_rate |
80 | 0–127 | continuous | ||
/se_1x/lfo1_depth |
81 | 0–127 | continuous | ||
/se_1x/lfo2_rate |
82 | 0–127 | continuous | ||
/se_1x/lfo2_depth |
83 | 0–127 | continuous | ||
/se_1x/lfo3_rate |
85 | 0–127 | continuous | ||
/se_1x/lfo3_depth |
86 | 0–127 | continuous | ||
/se_1x/osc1_mix_level |
87 | 0–127 | continuous | ||
/se_1x/osc2_mix_level |
88 | 0–127 | continuous | ||
/se_1x/osc3_mix_level |
89 | 0–127 | continuous | ||
/se_1x/noise_mix_level |
90 | 0–127 | continuous | ||
/se_1x/ring_mod_mix_level |
91 | 0–127 | continuous | ||
/se_1x/vcf_frequency |
92 | 0–127 | continuous | ||
/se_1x/vcf_resonance |
93 | 0–127 | continuous | ||
/se_1x/vcf_tracking |
94 | 0–127 | continuous | ||
/se_1x/env1_amount |
95 | 0–127 | continuous | ||
/se_1x/env1_attack |
102 | 0–127 | continuous | ||
/se_1x/env1_decay |
103 | 0–127 | continuous | ||
/se_1x/env1_sustain |
104 | 0–127 | continuous | ||
/se_1x/env1_release |
105 | 0–127 | continuous | ||
/se_1x/env2_attack |
106 | 0–127 | continuous | ||
/se_1x/env2_decay |
107 | 0–127 | continuous | ||
/se_1x/env2_sustain |
108 | 0–127 | continuous | ||
/se_1x/env2_release |
109 | 0–127 | continuous | ||
/se_1x/env3_attack |
110 | 0–127 | continuous | ||
/se_1x/env3_decay |
111 | 0–127 | continuous | ||
/se_1x/env3_sustain |
112 | 0–127 | continuous | ||
/se_1x/env3_release |
113 | 0–127 | continuous | ||
/se_1x/env3_amount |
114 | 0–127 | continuous | ||
/se_1x/env4_attack |
115 | 0–127 | continuous | ||
/se_1x/env4_decay |
116 | 0–127 | continuous | ||
/se_1x/env4_sustain |
117 | 0–127 | continuous | ||
/se_1x/env4_release |
118 | 0–127 | continuous | ||
/se_1x/env4_amount |
119 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /se_1x/note/on <note> <velocity>, /se_1x/cc/<number> <value>, /se_1x/pitchbend <0-16383>, /se_1x/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.