Skip to content

Sequential Take 5: MIDI CC, NRPN and OSC map

The Sequential Take 5 as named OSC addresses — 89 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Sequential Take 5
Vendor Sequential
OSC prefix /take_5
Source 📦 Derived from MIDI Guide (community CC/NRPN data)
Firmware unknown
Revision per pencilresearch canonical CSV
Upstream pencilresearch
Data licence CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors
Driver file devices/sequential/take_5.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/sequential/take_5.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /take_5/mod_wheel 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as take_5: ask “what can the Sequential Take 5 do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (89)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/take_5/mod_wheel 1 0–127 continuous
/take_5/breath 2 0–127 continuous
/take_5/bpm 3 0–127 continuous
/take_5/foot_controller 4 0–127 continuous
/take_5/glide_mode 5 0–127 continuous
/take_5/data_entry_msb 6 0–127 continuous
/take_5/master_volume 7 0–127 continuous
/take_5/osc1_octave04 8 0–127 continuous
/take_5/osc1_fine_freq 9 0–127 continuous
/take_5/osc1_shape 10 0–127 continuous
/take_5/expression_pedal 11 0–127 continuous
/take_5/voice_volume 12 0–127 continuous
/take_5/osc2_octave04 13 0–127 continuous
/take_5/osc2_fine_freq 14 0–127 continuous
/take_5/osc2_shape 15 0–127 continuous
/take_5/fx_on_off01 16 0–127 continuous
/take_5/fx_type08 17 0–127 continuous
/take_5/fx_depth_mix 18 0–127 continuous
/take_5/fx_time 19 0–127 continuous
/take_5/fx_feedback_misc 20 0–127 continuous
/take_5/fx_clock_sync_on_off01 21 0–127 continuous
/take_5/fx_clock_sync_rate010 22 0–127 continuous
/take_5/reverb_on_off01 23 0–127 continuous
/take_5/reverb_wet_dry_mix 24 0–127 continuous
/take_5/reverb_size 25 0–127 continuous
/take_5/reverb_predelay 26 0–127 continuous
/take_5/reverb_decay 27 0–127 continuous
/take_5/reverb_tone 28 0–127 continuous
/take_5/1_oct01 29 0–127 continuous
/take_5/2_oct01 30 0–127 continuous
/take_5/unison_on_off01 31 0–127 continuous
/take_5/bank_select_lsb 32 0–127 continuous
/take_5/filter_cutoff 33 0–127 continuous
/take_5/filter_resonance 34 0–127 continuous
/take_5/filter_drive 35 0–127 continuous
/take_5/filter_key_tracking 36 0–127 continuous
/take_5/vintage 37 0–127 continuous
/take_5/data_entry_lsb 38 0–127 continuous
/take_5/osc_sync01 39 0–127 continuous
/take_5/osc1_level 40 0–127 continuous
/take_5/osc2_level 41 0–127 continuous
/take_5/sub_osc_level 42 0–127 continuous
/take_5/noise_level 43 0–127 continuous
/take_5/fm_on_of01 44 0–127 continuous
/take_5/env1_delay 45 0–127 continuous
/take_5/env1_attack 46 0–127 continuous
/take_5/env1_decay 47 0–127 continuous
/take_5/env1_sustain 48 0–127 continuous
/take_5/env1_release 49 0–127 continuous
/take_5/env1_amount 50 0–127 continuous
/take_5/env1_vel_on_off01 51 0–127 continuous
/take_5/env2_del 52 0–127 continuous
/take_5/env2_attack 53 0–127 continuous
/take_5/env2_decay 54 0–127 continuous
/take_5/env2_sustain 55 0–127 continuous
/take_5/env2_release 56 0–127 continuous
/take_5/env2_amount 57 0–127 continuous
/take_5/env2_vel_on_off01 58 0–127 continuous
/take_5/arp_on_off01 59 0–127 continuous
/take_5/arp_mode02 60 0–127 continuous
/take_5/arp_octave02 61 0–127 continuous
/take_5/arp_repeats03 62 0–127 continuous
/take_5/clock_divide07 63 0–127 continuous
/take_5/sustain_pedal 64 0–127 continuous
/take_5/osc1_glide_rate 65 0–127 continuous
/take_5/osc2_glide_rate 66 0–127 continuous
/take_5/distortion 67 0–127 continuous
/take_5/glide_on_off01 68 0–127 continuous
/take_5/env_routing02 69 0–127 continuous
/take_5/unison_voice_count05 70 0–127 continuous
/take_5/unison_detune07 71 0–127 continuous
/take_5/unison_key_mode02 72 0–127 continuous
/take_5/unison_retrigger01 73 0–127 continuous
/take_5/brightness 74 0–127 continuous
/take_5/lfo1_freq 75 0–127 continuous
/take_5/lfo1_amount 76 0–127 continuous
/take_5/lfo1_shape04 77 0–127 continuous
/take_5/lfo1_sync_on_off01 78 0–127 continuous
/take_5/lfo1_note_reset01 79 0–127 continuous
/take_5/lfo2_freq 80 0–127 continuous
/take_5/lfo2_amount 81 0–127 continuous
/take_5/lfo2_shape04 82 0–127 continuous
/take_5/lfo2_sync_on_off01 83 0–127 continuous
/take_5/lfo2_note_reset01 84 0–127 continuous
/take_5/pitch_bend_range_up012 85 0–127 continuous
/take_5/pitch_bend_range_down024 86 0–127 continuous
/take_5/osc1_key_tracking_on_off01 87 0–127 continuous
/take_5/osc2_key_tracking_on_off01 88 0–127 continuous
/take_5/key_split_note044 89 0–127 continuous

Performance MIDI

Notes, pitch bend and any CC are also available: /take_5/note/on <note> <velocity>, /take_5/cc/<number> <value>, /take_5/pitchbend <0-16383>, /take_5/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.