Sequential Prophet-6: MIDI CC, NRPN and OSC map¶
The Sequential Prophet-6 as named OSC addresses — 60 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Sequential Prophet-6 |
|---|---|
| Vendor | Sequential |
| OSC prefix | /prophet_6 |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/sequential/prophet_6.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/sequential/prophet_6.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as prophet_6: ask “what can the Sequential Prophet-6 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (61)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/prophet_6/msb |
continuous | ||||
/prophet_6/mod_wheel |
1 | 0–127 | continuous | ||
/prophet_6/bpm |
3 | 0–127 | continuous | ||
/prophet_6/foot_controller |
4 | 0–127 | continuous | ||
/prophet_6/glide_mode |
5 | 0–127 | continuous | ||
/prophet_6/data_entry_msb |
6 | 0–127 | continuous | ||
/prophet_6/midi_volume |
7 | 0–127 | continuous | ||
/prophet_6/sub_osc_level |
8 | 0–127 | continuous | ||
/prophet_6/distortion_amount |
9 | 0–127 | continuous | ||
/prophet_6/data_entry_lsb |
38 | 0–127 | continuous | ||
/prophet_6/volume_lsb |
39 | 0–127 | continuous | ||
/prophet_6/vca_env_amt |
40 | 0–127 | continuous | ||
/prophet_6/vca_env_vel_amt |
41 | 0–127 | continuous | ||
/prophet_6/vca_env_attack |
43 | 0–127 | continuous | ||
/prophet_6/vca_env_decay |
44 | 0–127 | continuous | ||
/prophet_6/vca_env_sustain |
45 | 0–127 | continuous | ||
/prophet_6/vca_env_release |
46 | 0–127 | continuous | ||
/prophet_6/low_pass_env_amt |
47 | 0–127 | continuous | ||
/prophet_6/filter_env_attack |
50 | 0–127 | continuous | ||
/prophet_6/filter_env_decay |
51 | 0–127 | continuous | ||
/prophet_6/filter_env_sustain |
52 | 0–127 | continuous | ||
/prophet_6/filter_env_release |
53 | 0–127 | continuous | ||
/prophet_6/high_pass_env_amt |
54 | 0–127 | continuous | ||
/prophet_6/arp_on_off |
58 | 0–127 | continuous | ||
/prophet_6/arp_mode |
59 | 0–127 | continuous | ||
/prophet_6/arp_range |
60 | 0–127 | continuous | ||
/prophet_6/arp_time_signature |
62 | 0–127 | continuous | ||
/prophet_6/damper_pedal |
64 | 0–127 | continuous | ||
/prophet_6/glide_on_off |
65 | 0–127 | continuous | ||
/prophet_6/osc1_freq |
67 | 0–127 | continuous | ||
/prophet_6/osc1_level |
69 | 0–127 | continuous | ||
/prophet_6/osc1_shape |
70 | 0–127 | continuous | ||
/prophet_6/osc1_pw |
71 | 0–127 | continuous | ||
/prophet_6/brightness |
74 | 0–127 | continuous | ||
/prophet_6/osc2_freq |
75 | 0–127 | continuous | ||
/prophet_6/osc2_freq_fine |
76 | 0–127 | continuous | ||
/prophet_6/osc2_level |
77 | 0–127 | continuous | ||
/prophet_6/osc2_shape |
78 | 0–127 | continuous | ||
/prophet_6/osc2_pw |
79 | 0–127 | continuous | ||
/prophet_6/data_increment |
96 | 0–127 | continuous | ||
/prophet_6/data_decrement |
97 | 0–127 | continuous | ||
/prophet_6/nrpn_param_lsb |
98 | 0–127 | continuous | ||
/prophet_6/nrpn_param_msb |
99 | 0–127 | continuous | ||
/prophet_6/rpn_param_lsb |
100 | 0–127 | continuous | ||
/prophet_6/rpn_param_msb |
101 | 0–127 | continuous | ||
/prophet_6/low_pass_freq |
102 | 0–127 | continuous | ||
/prophet_6/low_pass_resonance |
103 | 0–127 | continuous | ||
/prophet_6/low_pass_key_amt |
104 | 0–127 | continuous | ||
/prophet_6/low_pass_vel_on_off |
105 | 0–127 | continuous | ||
/prophet_6/high_pass_freq |
106 | 0–127 | continuous | ||
/prophet_6/high_pass_resonance |
107 | 0–127 | continuous | ||
/prophet_6/high_pass_key_amt |
108 | 0–127 | continuous | ||
/prophet_6/high_pass_vel_on_off |
109 | 0–127 | continuous | ||
/prophet_6/all_sound_off |
120 | 0–127 | continuous | ||
/prophet_6/reset_controllers |
121 | 0–127 | continuous | ||
/prophet_6/reset_contro |
122 | 0–127 | continuous | ||
/prophet_6/all_notes_off |
123 | 0–127 | continuous | ||
/prophet_6/omni_mode_off |
124 | 0–127 | continuous | ||
/prophet_6/omni_mode_on |
125 | 0–127 | continuous | ||
/prophet_6/mono_mode_on |
126 | 0–127 | continuous | ||
/prophet_6/poly_mode_on |
127 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /prophet_6/note/on <note> <velocity>, /prophet_6/cc/<number> <value>, /prophet_6/pitchbend <0-16383>, /prophet_6/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.