Sequential Pro-800 NIG V3: MIDI CC, NRPN and OSC map¶
The Sequential Pro-800 NIG V3 as named OSC addresses — 76 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Sequential Pro-800 NIG V3 |
|---|---|
| Vendor | Sequential |
| OSC prefix | /pro_800_nig_v3 |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/sequential/pro_800_nig_v3.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/sequential/pro_800_nig_v3.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as pro_800_nig_v3: ask “what can the Sequential Pro-800 NIG V3 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (76)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/pro_800_nig_v3/oscillators/osc_a_freq |
8 | -500–499 | continuous | Oscillators | |
/pro_800_nig_v3/osc_b_sync |
54 | 0–127 | continuous | ||
/pro_800_nig_v3/vcf_cutoff |
15 | 0–999 | continuous | ||
/pro_800_nig_v3/vcf_reso |
16 | 0–999 | continuous | ||
/pro_800_nig_v3/vcf_attack |
21 | 0–127 | continuous | ||
/pro_800_nig_v3/vcf_attack |
20 | 0–127 | continuous | ||
/pro_800_nig_v3/vcf_attack |
19 | 0–127 | continuous | ||
/pro_800_nig_v3/vcf_attack |
18 | 0–127 | continuous | ||
/pro_800_nig_v3/oscillators/osc_b_freq |
11 | -500–499 | continuous | Oscillators | |
/pro_800_nig_v3/oscillators/fine |
14 | -500–493 | continuous | Oscillators | |
/pro_800_nig_v3/vcf_env_amount |
17 | -500–499 | continuous | ||
/pro_800_nig_v3/oscillators/overall_vol |
7 | 0–999 | continuous | Oscillators | |
/pro_800_nig_v3/vca_attack |
25 | 0–127 | continuous | ||
/pro_800_nig_v3/vca_attack |
24 | 0–127 | continuous | ||
/pro_800_nig_v3/vca_attack |
23 | 0–127 | continuous | ||
/pro_800_nig_v3/vca_attack |
22 | 0–127 | continuous | ||
/pro_800_nig_v3/lfo_freq |
28 | 0–999 | continuous | ||
/pro_800_nig_v3/init_amount |
29 | 0–999 | continuous | ||
/pro_800_nig_v3/freq_or_vca |
74 | 0–127 | continuous | ||
/pro_800_nig_v3/pwm |
76 | 0–127 | continuous | ||
/pro_800_nig_v3/filter |
75 | 0–127 | continuous | ||
/pro_800_nig_v3/oscillators/osc_a_vol |
9 | 0–999 | continuous | Oscillators | |
/pro_800_nig_v3/flt_env |
26 | -500–499 | continuous | ||
/pro_800_nig_v3/osc_b |
27 | 0–999 | continuous | ||
/pro_800_nig_v3/freq_a |
55 | 0–127 | continuous | ||
/pro_800_nig_v3/filter |
56 | 0–127 | continuous | ||
/pro_800_nig_v3/lfo_fine_at |
116 | 0–127 | continuous | ||
/pro_800_nig_v3/oscillators/osc_b_vol |
12 | 0–999 | continuous | Oscillators | |
/pro_800_nig_v3/arp_mode |
73 | 0–127 | continuous | ||
/pro_800_nig_v3/hold |
64 | 0–127 | continuous | ||
/pro_800_nig_v3/glide |
30 | 0–999 | continuous | ||
/pro_800_nig_v3/fine_amount |
111 | 0–999 | continuous | ||
/pro_800_nig_v3/modwhl_target |
70 | 0–127 | continuous | ||
/pro_800_nig_v3/oscillators/noise |
37 | 0–999 | continuous | Oscillators | |
/pro_800_nig_v3/all_notes_off |
120 | 0–127 | continuous | ||
/pro_800_nig_v3/osc_a_saw |
48 | 0–127 | continuous | ||
/pro_800_nig_v3/osc_a_tri |
49 | 0–127 | continuous | ||
/pro_800_nig_v3/osc_a_square |
50 | 0–127 | continuous | ||
/pro_800_nig_v3/oscillators/osc_a_pw |
10 | 0–999 | continuous | Oscillators | |
/pro_800_nig_v3/osc_b_saw |
51 | 0–127 | continuous | ||
/pro_800_nig_v3/osc_b_tri |
52 | 0–127 | continuous | ||
/pro_800_nig_v3/osc_b_square |
53 | 0–127 | continuous | ||
/pro_800_nig_v3/oscillators/osc_b_pw |
13 | 0–999 | continuous | Oscillators | |
/pro_800_nig_v3/osc_a |
68 | 0–127 | continuous | ||
/pro_800_nig_v3/detune |
36 | 0–999 | continuous | ||
/pro_800_nig_v3/fine_detune |
112 | 0–127 | continuous | ||
/pro_800_nig_v3/osc_b |
69 | 0–127 | continuous | ||
/pro_800_nig_v3/glide_mode |
79 | 0–127 | continuous | ||
/pro_800_nig_v3/unison |
65 | 0–127 | continuous | ||
/pro_800_nig_v3/voice_spread |
77 | 0–127 | continuous | ||
/pro_800_nig_v3/vib_speed |
34 | 0–999 | continuous | ||
/pro_800_nig_v3/vib_amount |
35 | 0–999 | continuous | ||
/pro_800_nig_v3/fine_reso |
88 | 0–127 | continuous | ||
/pro_800_nig_v3/fine_env_amnt |
89 | 0–127 | continuous | ||
/pro_800_nig_v3/vcf_vel |
32 | 0–999 | continuous | ||
/pro_800_nig_v3/vcf_env_speed |
62 | 0–127 | continuous | ||
/pro_800_nig_v3/vcf_env_shape |
61 | 0–127 | continuous | ||
/pro_800_nig_v3/vca_vel |
31 | 0–999 | continuous | ||
/pro_800_nig_v3/vca_env_speed |
72 | 0–127 | continuous | ||
/pro_800_nig_v3/vca_env_shape |
63 | 0–127 | continuous | ||
/pro_800_nig_v3/kybd_tracking |
60 | 0–127 | continuous | ||
/pro_800_nig_v3/tracking_note |
78 | 0–127 | continuous | ||
/pro_800_nig_v3/vca_aftertouch |
39 | 0–999 | continuous | ||
/pro_800_nig_v3/vcf_aftertouch |
40 | 0–999 | continuous | ||
/pro_800_nig_v3/vcf_fine_at |
115 | 0–127 | continuous | ||
/pro_800_nig_v3/fine_init_amt |
105 | 0–127 | continuous | ||
/pro_800_nig_v3/lfo_shape |
57 | 0–127 | continuous | ||
/pro_800_nig_v3/lfo_speed |
58 | 0–127 | continuous | ||
/pro_800_nig_v3/mod_delay |
33 | 0–999 | continuous | ||
/pro_800_nig_v3/lfo_targets |
59 | 0–127 | continuous | ||
/pro_800_nig_v3/lfo_aftertouch |
41 | 0–999 | continuous | ||
/pro_800_nig_v3/flt_fine_env |
102 | 0–127 | continuous | ||
/pro_800_nig_v3/fine_osc_b |
103 | 0–127 | continuous | ||
/pro_800_nig_v3/amount |
67 | 0–127 | continuous | ||
/pro_800_nig_v3/target |
66 | 0–127 | continuous | ||
/pro_800_nig_v3/oscillators/range |
42 | 0–31 | continuous | Oscillators |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /pro_800_nig_v3/note/on <note> <velocity>, /pro_800_nig_v3/cc/<number> <value>, /pro_800_nig_v3/pitchbend <0-16383>, /pro_800_nig_v3/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.