Roland XV5080 V0.3: MIDI CC, NRPN and OSC map¶
The Roland XV5080 V0.3 as named OSC addresses — 25 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Roland XV5080 V0.3 |
|---|---|
| Vendor | Roland |
| OSC prefix | /xv5080_v0_3 |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/roland/xv5080_v0_3.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/xv5080_v0_3.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as xv5080_v0_3: ask “what can the Roland XV5080 V0.3 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (25)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/xv5080_v0_3/volume |
7 | 0–127 | continuous | ||
/xv5080_v0_3/balance |
8 | -64–63 | continuous | ||
/xv5080_v0_3/tone_1 |
80 | 0–127 | continuous | ||
/xv5080_v0_3/tone_2 |
81 | 0–127 | continuous | ||
/xv5080_v0_3/tone_3 |
82 | 0–127 | continuous | ||
/xv5080_v0_3/tone_4 |
83 | 0–127 | continuous | ||
/xv5080_v0_3/porta |
65 | 0–127 | continuous | ||
/xv5080_v0_3/porta_time |
5 | 0–127 | continuous | ||
/xv5080_v0_3/porta_control |
84 | 0–127 | continuous | ||
/xv5080_v0_3/vibrato_depth |
77 | -64–63 | continuous | ||
/xv5080_v0_3/vibrato_rate |
76 | -64–63 | continuous | ||
/xv5080_v0_3/vibrato_delay |
78 | -64–63 | continuous | ||
/xv5080_v0_3/cutoff |
74 | -64–63 | continuous | ||
/xv5080_v0_3/resonance |
71 | -64–63 | continuous | ||
/xv5080_v0_3/attack |
73 | -64–63 | continuous | ||
/xv5080_v0_3/decay |
75 | -64–63 | continuous | ||
/xv5080_v0_3/release |
72 | -64–63 | continuous | ||
/xv5080_v0_3/reverb_send |
91 | 0–127 | continuous | ||
/xv5080_v0_3/chorus_send |
93 | 0–127 | continuous | ||
/xv5080_v0_3/hold |
64 | 0–127 | continuous | ||
/xv5080_v0_3/hold_2 |
69 | 0–127 | continuous | ||
/xv5080_v0_3/sostenuto |
66 | 0–127 | continuous | ||
/xv5080_v0_3/soft |
67 | 0–127 | continuous | ||
/xv5080_v0_3/legato |
68 | 0–127 | continuous | ||
/xv5080_v0_3/all_notes_off |
123 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /xv5080_v0_3/note/on <note> <velocity>, /xv5080_v0_3/cc/<number> <value>, /xv5080_v0_3/pitchbend <0-16383>, /xv5080_v0_3/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.