Skip to content

Roland TR-6S: MIDI CC, NRPN and OSC map

The Roland TR-6S as named OSC addresses — 61 CC, 8 SysEx commands — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Roland TR-6S
Vendor Roland
OSC prefix /tr_6s
Source 🎛️ Derived from an Electra One community preset
Revision per pencilresearch canonical CSV
Upstream electra-preset
Driver file devices/roland/tr_6s.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/tr_6s.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /tr_6s/beat 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as tr_6s: ask “what can the Roland TR-6S do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (61)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/tr_6s/beat 2 0–127 continuous
/tr_6s/shuffle 9 0–127 continuous
/tr_6s/master_fx 15 0–127 continuous
/tr_6s/delay_level 16 0–127 continuous
/tr_6s/delay_time 17 0–127 continuous
/tr_6s/delay_feedback 18 0–127 continuous
/tr_6s/master_fx_ctrl 19 0–127 continuous
/tr_6s/bd_tune 20 0–127 continuous
/tr_6s/bd_decay 23 0–127 continuous
/tr_6s/bd_level 24 0–127 continuous
/tr_6s/sd_tune 25 0–127 continuous
/tr_6s/sd_decay 28 0–127 continuous
/tr_6s/sd_level 29 0–127 continuous
/tr_6s/lt_tune 46 0–127 continuous
/tr_6s/lt_decay 47 0–127 continuous
/tr_6s/lt_level 48 0–127 continuous
/tr_6s/hc_tune 58 0–127 continuous
/tr_6s/hc_decay 59 0–127 continuous
/tr_6s/hc_level 60 0–127 continuous
/tr_6s/ch_tune 61 0–127 continuous
/tr_6s/ch_decay 62 0–127 continuous
/tr_6s/ch_level 63 0–127 continuous
/tr_6s/oh_tune 80 0–127 continuous
/tr_6s/oh_decay 81 0–127 continuous
/tr_6s/oh_level 82 0–127 continuous
/tr_6s/fill_in_trig 70 0–127 continuous
/tr_6s/accent 71 0–127 continuous
/tr_6s/reverb_level 91 0–127 continuous
/tr_6s/bd_ctrl 96 0–127 continuous
/tr_6s/sd_ctrl 97 0–127 continuous
/tr_6s/lt_ctrl 102 0–127 continuous
/tr_6s/hc_ctrl 106 0–127 continuous
/tr_6s/ch_ctrl 107 0–127 continuous
/tr_6s/oh_ctrl 108 0–127 continuous
/tr_6s/tune 20 -128–127 continuous
/tr_6s/tune 25 -128–127 continuous
/tr_6s/tune 46 -128–127 continuous
/tr_6s/tune 58 -128–127 continuous
/tr_6s/tune 61 -128–127 continuous
/tr_6s/tune 80 -128–127 continuous
/tr_6s/decay 23 0–255 continuous
/tr_6s/decay 28 0–255 continuous
/tr_6s/decay 47 0–255 continuous
/tr_6s/decay 59 0–255 continuous
/tr_6s/decay 62 0–255 continuous
/tr_6s/decay 81 0–255 continuous
/tr_6s/control 96 0–255 continuous
/tr_6s/control 97 0–255 continuous
/tr_6s/control 102 0–255 continuous
/tr_6s/control 106 0–255 continuous
/tr_6s/control 107 0–255 continuous
/tr_6s/control 108 0–255 continuous
/tr_6s/level 24 0–255 continuous
/tr_6s/level 29 0–255 continuous
/tr_6s/level 48 0–255 continuous
/tr_6s/level 60 0–255 continuous
/tr_6s/level 63 0–255 continuous
/tr_6s/level 82 0–255 continuous
/tr_6s/external_level 12 0–127 continuous
/tr_6s/manual_trig 70 0–127 continuous
/tr_6s/auto_fill_in 14 0–127 continuous

SysEx commands (8)

OSC address Arguments
/tr_6s/a val: u7
/tr_6s/b val: u7
/tr_6s/c val: u7
/tr_6s/d val: u7
/tr_6s/e val: u7
/tr_6s/f val: u7
/tr_6s/g val: u7
/tr_6s/h val: u7

Performance MIDI

Notes, pitch bend and any CC are also available: /tr_6s/note/on <note> <velocity>, /tr_6s/cc/<number> <value>, /tr_6s/pitchbend <0-16383>, /tr_6s/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.