Roland SH-4d: MIDI CC, NRPN and OSC map¶
The Roland SH-4d as named OSC addresses — 31 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Roland SH-4d |
|---|---|
| Vendor | Roland |
| OSC prefix | /sh_4d |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/roland/sh_4d.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/sh_4d.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as sh_4d: ask “what can the Roland SH-4d do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (31)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/sh_4d/mod |
1 | 0–127 | continuous | ||
/sh_4d/volume |
7 | 0–127 | continuous | ||
/sh_4d/pan |
11 | 0–127 | continuous | ||
/sh_4d/cutoff |
74 | 0–127 | continuous | ||
/sh_4d/reso |
71 | 0–127 | continuous | ||
/sh_4d/drive |
90 | 0–127 | continuous | ||
/sh_4d/hpf_cutoff |
79 | 0–127 | continuous | ||
/sh_4d/filter_env |
81 | 0–127 | continuous | ||
/sh_4d/filter_key |
78 | 0–127 | continuous | ||
/sh_4d/filter_attack |
82 | 0–127 | continuous | ||
/sh_4d/filter_decay |
83 | 0–127 | continuous | ||
/sh_4d/filter_sustain |
28 | 0–127 | continuous | ||
/sh_4d/filter_release |
29 | 0–127 | continuous | ||
/sh_4d/amp_attack |
73 | 0–127 | continuous | ||
/sh_4d/amp_decay |
75 | 0–127 | continuous | ||
/sh_4d/amp_sustain |
31 | 0–127 | continuous | ||
/sh_4d/amp_release |
72 | 0–127 | continuous | ||
/sh_4d/pitch |
21 | 0–127 | continuous | ||
/sh_4d/timbre |
77 | 0–127 | continuous | ||
/sh_4d/slider1 |
85 | 0–127 | continuous | ||
/sh_4d/slider2 |
86 | 0–127 | continuous | ||
/sh_4d/slider3 |
87 | 0–127 | continuous | ||
/sh_4d/slider4 |
88 | 0–127 | continuous | ||
/sh_4d/portamento |
84 | 0–127 | continuous | ||
/sh_4d/lfo_rate |
16 | 0–127 | continuous | ||
/sh_4d/lfo_fade_time |
20 | 0–127 | continuous | ||
/sh_4d/lfo_pitch |
18 | 0–127 | continuous | ||
/sh_4d/lfo_filter |
19 | 0–127 | continuous | ||
/sh_4d/lfo_amp |
80 | 0–127 | continuous | ||
/sh_4d/pedal_hold |
64 | 0–127 | continuous | ||
/sh_4d/sostenuto |
66 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /sh_4d/note/on <note> <velocity>, /sh_4d/cc/<number> <value>, /sh_4d/pitchbend <0-16383>, /sh_4d/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.