Skip to content

Roland JX-08: MIDI CC, NRPN and OSC map

The Roland JX-08 as named OSC addresses — 48 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Roland JX-08
Vendor Roland
OSC prefix /jx_08
Source 📦 Derived from MIDI Guide (community CC/NRPN data)
Firmware unknown
Revision per pencilresearch canonical CSV
Upstream pencilresearch
Data licence CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors
Driver file devices/roland/jx_08.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/jx_08.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /jx_08/general/modulation 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as jx_08: ask “what can the Roland JX-08 do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (48)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/jx_08/general/modulation 1 0–127 continuous General
/jx_08/general/portamento_time 117 0–127 continuous General
/jx_08/general/pattern_part_level 7 0–127 continuous General
/jx_08/general/expression_pedal 11 0–127 continuous General
/jx_08/general/pitchbend 41 0–127 continuous General
/jx_08/general/hold 64 0–127 continuous General
/jx_08/general/reverb_send_level 91 0–127 continuous General
/jx_08/general/portamento_switch 118 0–127 continuous General
/jx_08/general/solo_poly_unison 119 0–127 continuous General
/jx_08/lfo/delay_time 27 0–127 continuous LFO
/jx_08/lfo/rate 29 0–127 continuous LFO
/jx_08/lfo/waveform 35 0–127 continuous LFO
/jx_08/dco/dco_1_tune 20 0–127 continuous DCO
/jx_08/dco/dco_1_range 47 0–127 continuous DCO
/jx_08/dco/dco_1_lfo 26 0–127 continuous DCO
/jx_08/dco/dco_1_waveform 46 0–127 continuous DCO
/jx_08/dco/dco_1_envelope_mode 60 0–127 continuous DCO
/jx_08/dco/dco_1_envelope_modulation 21 0–127 continuous DCO
/jx_08/dco/dco_2_tune 87 0–127 continuous DCO
/jx_08/dco/dco_2_finetune 56 0–127 continuous DCO
/jx_08/dco/dco_2_range 62 0–127 continuous DCO
/jx_08/dco/dco_2_lfo 25 0–127 continuous DCO
/jx_08/dco/dco_2_waveform 61 0–127 continuous DCO
/jx_08/dco/dco_2_envelope_mode 63 0–127 continuous DCO
/jx_08/dco/dco_2_cross_modulation 59 0–127 continuous DCO
/jx_08/mixer/dco_1_level 16 0–127 continuous Mixer
/jx_08/mixer/dco_2_level 17 0–127 continuous Mixer
/jx_08/mixer/envelope 18 0–127 continuous Mixer
/jx_08/mixer/envelope_mode 19 0–127 continuous Mixer
/jx_08/vcf/hpf_cutoff 79 0–127 continuous VCF
/jx_08/vcf/cutoff 3 0–127 continuous VCF
/jx_08/vcf/resonance 9 0–127 continuous VCF
/jx_08/vcf/envelope_mode 84 0–127 continuous VCF
/jx_08/vcf/envelope_modulation 81 0–127 continuous VCF
/jx_08/vcf/key_follow 82 0–127 continuous VCF
/jx_08/vcf/lfo_modulation 28 0–127 continuous VCF
/jx_08/vca/envelope_mode 109 0–127 continuous VCA
/jx_08/vca/level 110 0–127 continuous VCA
/jx_08/envelopes/env_1_attack 83 0–127 continuous Envelopes
/jx_08/envelopes/env_1_decay 80 0–127 continuous Envelopes
/jx_08/envelopes/env_1_sustain 85 0–127 continuous Envelopes
/jx_08/envelopes/env_1_release 86 0–127 continuous Envelopes
/jx_08/envelopes/env_1_key_follow 104 0–127 continuous Envelopes
/jx_08/envelopes/env_2_attack 89 0–127 continuous Envelopes
/jx_08/envelopes/env_2_decay 90 0–127 continuous Envelopes
/jx_08/envelopes/env_2_sustain 102 0–127 continuous Envelopes
/jx_08/envelopes/env_2_release 103 0–127 continuous Envelopes
/jx_08/envelopes/env_2_key_follow 105 0–127 continuous Envelopes

Performance MIDI

Notes, pitch bend and any CC are also available: /jx_08/note/on <note> <velocity>, /jx_08/cc/<number> <value>, /jx_08/pitchbend <0-16383>, /jx_08/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.