Roland Jupiter-6 Tauntek Upgrade: MIDI CC, NRPN and OSC map¶
The Roland Jupiter-6 Tauntek Upgrade as named OSC addresses — 63 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Roland Jupiter-6 Tauntek Upgrade |
|---|---|
| Vendor | Roland |
| OSC prefix | /jupiter_6_tauntek_upgrade |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/roland/jupiter_6_tauntek_upgrade.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/jupiter_6_tauntek_upgrade.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as jupiter_6_tauntek_upgrade: ask “what can the Roland Jupiter-6 Tauntek Upgrade do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (63)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/jupiter_6_tauntek_upgrade/performance/mod_wheel |
1 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/hold |
30 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/glissando |
29 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/bender |
28 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/portamento_switch |
65 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/sustain_pedal |
64 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/volume |
7 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/split_balance_cc08 |
8 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/split_balance_cc80 |
80 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/master_tune |
79 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/key_assign_mode |
77 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/unison_detune |
63 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/glide_time_cc05 |
5 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/performance/glide_time_cc62 |
62 | 0–127 | continuous | Performance | |
/jupiter_6_tauntek_upgrade/oscillators/vco1_triangle |
20 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco1_saw |
21 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco1_pulse |
22 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco1_square |
23 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco2_triangle |
24 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco2_saw |
25 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco2_pulse |
26 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco2_noise |
27 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_1_range |
40 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_2_range |
41 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_2_fine |
42 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_mixer |
43 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/pulse_width |
36 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/pwm_amount |
37 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/pwm_mod_source |
67 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_mod_amount |
34 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_mod_source |
68 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_mod_by_env1 |
35 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/xmod_manual |
38 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/xmod_by_env1 |
39 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/osc_sync_mode |
72 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_1_wave_bitmask |
69 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/oscillators/vco_2_wave_bitmask |
70 | 0–127 | continuous | Oscillators | |
/jupiter_6_tauntek_upgrade/lfo/lfo1_rate |
32 | 0–127 | continuous | LFO | |
/jupiter_6_tauntek_upgrade/lfo/lfo1_delay |
33 | 0–127 | continuous | LFO | |
/jupiter_6_tauntek_upgrade/lfo/lfo1_shape |
66 | 0–127 | continuous | LFO | |
/jupiter_6_tauntek_upgrade/filter/vcf_frequency |
44 | 0–127 | continuous | Filter | |
/jupiter_6_tauntek_upgrade/filter/vcf_resonance |
45 | 0–127 | continuous | Filter | |
/jupiter_6_tauntek_upgrade/filter/vcf_mod_by_env |
46 | 0–127 | continuous | Filter | |
/jupiter_6_tauntek_upgrade/filter/vcf_mod_by_lfo1 |
47 | 0–127 | continuous | Filter | |
/jupiter_6_tauntek_upgrade/filter/vcf_keyboard_tracking |
48 | 0–127 | continuous | Filter | |
/jupiter_6_tauntek_upgrade/filter/mode |
71 | 0–127 | continuous | Filter | |
/jupiter_6_tauntek_upgrade/filter/vcf_envelope_select |
73 | 0–127 | continuous | Filter | |
/jupiter_6_tauntek_upgrade/filter/vcf_env1_polarity |
74 | 0–127 | continuous | Filter | |
/jupiter_6_tauntek_upgrade/amplifier/vca_by_env2_amount |
49 | 0–127 | continuous | Amplifier | |
/jupiter_6_tauntek_upgrade/amplifier/vca_mod_by_lfo1 |
50 | 0–127 | continuous | Amplifier | |
/jupiter_6_tauntek_upgrade/envelope_1/attack |
51 | 0–127 | continuous | Envelope 1 | |
/jupiter_6_tauntek_upgrade/envelope_1/decay |
52 | 0–127 | continuous | Envelope 1 | |
/jupiter_6_tauntek_upgrade/envelope_1/sustain |
53 | 0–127 | continuous | Envelope 1 | |
/jupiter_6_tauntek_upgrade/envelope_1/release |
54 | 0–127 | continuous | Envelope 1 | |
/jupiter_6_tauntek_upgrade/envelope_1/key_follow |
55 | 0–127 | continuous | Envelope 1 | |
/jupiter_6_tauntek_upgrade/envelope_2/attack |
56 | 0–127 | continuous | Envelope 2 | |
/jupiter_6_tauntek_upgrade/envelope_2/decay |
57 | 0–127 | continuous | Envelope 2 | |
/jupiter_6_tauntek_upgrade/envelope_2/sustain |
58 | 0–127 | continuous | Envelope 2 | |
/jupiter_6_tauntek_upgrade/envelope_2/release |
59 | 0–127 | continuous | Envelope 2 | |
/jupiter_6_tauntek_upgrade/envelope_2/key_follow |
60 | 0–127 | continuous | Envelope 2 | |
/jupiter_6_tauntek_upgrade/arpeggiator/arp_rate |
61 | 0–127 | continuous | Arpeggiator | |
/jupiter_6_tauntek_upgrade/arpeggiator/arp_mode |
84 | 0–127 | continuous | Arpeggiator | |
/jupiter_6_tauntek_upgrade/arpeggiator/arp_range |
85 | 0–127 | continuous | Arpeggiator |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /jupiter_6_tauntek_upgrade/note/on <note> <velocity>, /jupiter_6_tauntek_upgrade/cc/<number> <value>, /jupiter_6_tauntek_upgrade/pitchbend <0-16383>, /jupiter_6_tauntek_upgrade/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.