Roland Juno-60 Minerva: MIDI CC, NRPN and OSC map¶
The Roland Juno-60 Minerva as named OSC addresses — 33 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Roland Juno-60 Minerva |
|---|---|
| Vendor | Roland |
| OSC prefix | /juno_60_minerva |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/roland/juno_60_minerva.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/juno_60_minerva.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as juno_60_minerva: ask “what can the Roland Juno-60 Minerva do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (33)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/juno_60_minerva/waveform |
33 | 0–127 | continuous | ||
/juno_60_minerva/sub_osc |
26 | 0–127 | continuous | ||
/juno_60_minerva/pwm |
28 | 0–127 | continuous | ||
/juno_60_minerva/pwm_mode |
37 | 0–127 | continuous | ||
/juno_60_minerva/noise |
25 | 0–127 | continuous | ||
/juno_60_minerva/lfo |
30 | 0–127 | continuous | ||
/juno_60_minerva/hpf |
38 | 0–127 | continuous | ||
/juno_60_minerva/cutoff |
24 | 20–100 | continuous | ||
/juno_60_minerva/resonance |
27 | 0–127 | continuous | ||
/juno_60_minerva/env_polarity |
36 | 0–127 | continuous | ||
/juno_60_minerva/env |
16 | 0–127 | continuous | ||
/juno_60_minerva/lfo |
17 | 0–127 | continuous | ||
/juno_60_minerva/kybd |
18 | 0–127 | continuous | ||
/juno_60_minerva/vca_mode |
39 | 0–127 | continuous | ||
/juno_60_minerva/vca_level |
19 | 0–127 | continuous | ||
/juno_60_minerva/adsr |
20 | 0–127 | continuous | ||
/juno_60_minerva/adsr |
22 | 0–127 | continuous | ||
/juno_60_minerva/adsr |
23 | 0–127 | continuous | ||
/juno_60_minerva/adsr |
21 | 0–127 | continuous | ||
/juno_60_minerva/f_env |
44 | 0–127 | continuous | ||
/juno_60_minerva/ads |
40 | 0–127 | continuous | ||
/juno_60_minerva/ads |
41 | 0–127 | continuous | ||
/juno_60_minerva/ads |
42 | 0–127 | continuous | ||
/juno_60_minerva/f_env_depth |
43 | 0–127 | continuous | ||
/juno_60_minerva/chorus |
32 | 0–127 | continuous | ||
/juno_60_minerva/lfo_rate |
29 | 0–127 | continuous | ||
/juno_60_minerva/lfo_delay |
31 | 0–127 | continuous | ||
/juno_60_minerva/lfo_trigger |
34 | 0–127 | continuous | ||
/juno_60_minerva/transpose |
35 | 0–127 | continuous | ||
/juno_60_minerva/lfo_assigns |
49 | 0–127 | continuous | ||
/juno_60_minerva/velocity_assig |
53 | 0–127 | continuous | ||
/juno_60_minerva/arp_sync_value |
50 | 0–127 | continuous | ||
/juno_60_minerva/flt_trig_mode |
52 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /juno_60_minerva/note/on <note> <velocity>, /juno_60_minerva/cc/<number> <value>, /juno_60_minerva/pitchbend <0-16383>, /juno_60_minerva/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.