Skip to content

Roland JUNO 106 KIWI: MIDI CC, NRPN and OSC map

The Roland JUNO 106 KIWI as named OSC addresses — 49 CC, 2 SysEx commands — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Roland JUNO 106 KIWI
Vendor Roland
OSC prefix /juno_106_kiwi
Source 🎛️ Derived from an Electra One community preset
Revision per Electra preset
Upstream electra-preset
Driver file devices/roland/juno_106_kiwi.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/juno_106_kiwi.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /juno_106_kiwi/cutoff 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as juno_106_kiwi: ask “what can the Roland JUNO 106 KIWI do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (49)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/juno_106_kiwi/cutoff 41 0–127 continuous
/juno_106_kiwi/resonance 42 0–127 continuous
/juno_106_kiwi/keyboard 43 0–127 continuous
/juno_106_kiwi/cutoff 44 0–127 continuous
/juno_106_kiwi/chorus 57 0–127 continuous
/juno_106_kiwi/volume 7 0–127 continuous
/juno_106_kiwi/amount 47 0–127 continuous
/juno_106_kiwi/source 48 0–127 continuous
/juno_106_kiwi/amount 45 0–127 continuous
/juno_106_kiwi/source 46 0–127 continuous
/juno_106_kiwi/key_mode 104 0–127 continuous
/juno_106_kiwi/porta_time 5 0–127 continuous
/juno_106_kiwi/attack 51 0–127 continuous
/juno_106_kiwi/decay 52 0–127 continuous
/juno_106_kiwi/sustain 53 0–127 continuous
/juno_106_kiwi/release 54 0–127 continuous
/juno_106_kiwi/internal_veloc 107 0–127 continuous
/juno_106_kiwi/attack 65 0–127 continuous
/juno_106_kiwi/decay 66 0–127 continuous
/juno_106_kiwi/sustain 67 0–127 continuous
/juno_106_kiwi/release 68 0–127 continuous
/juno_106_kiwi/after_level 103 0–127 continuous
/juno_106_kiwi/wave 18 0–127 continuous
/juno_106_kiwi/rate 19 0–127 continuous
/juno_106_kiwi/delay 20 0–127 continuous
/juno_106_kiwi/mode 24 0–127 continuous
/juno_106_kiwi/wave 21 0–127 continuous
/juno_106_kiwi/rate 22 0–127 continuous
/juno_106_kiwi/delay 23 0–127 continuous
/juno_106_kiwi/mode 25 0–127 continuous
/juno_106_kiwi/amount 105 0–127 continuous
/juno_106_kiwi/range 8 0–127 continuous
/juno_106_kiwi/wave 9 0–127 continuous
/juno_106_kiwi/amount 10 0–64 continuous
/juno_106_kiwi/source 11 0–127 continuous
/juno_106_kiwi/sub_level 33 0–127 continuous
/juno_106_kiwi/noise_level 34 0–127 continuous
/juno_106_kiwi/amount 14 0–127 continuous
/juno_106_kiwi/source 15 0–127 continuous
/juno_106_kiwi/amount 12 0–127 continuous
/juno_106_kiwi/trig 61 0–127 continuous
/juno_106_kiwi/vca_lfo_src 60 0–127 continuous
/juno_106_kiwi/vca_lfo_level 59 0–127 continuous
/juno_106_kiwi/dco 69 0–127 continuous
/juno_106_kiwi/vcf 70 0–127 continuous
/juno_106_kiwi/dco_lfo 71 0–127 continuous
/juno_106_kiwi/midi_local 116 0–127 continuous
/juno_106_kiwi/all_notes_off 123 0–127 continuous
/juno_106_kiwi/all_sound_off 120 0–127 continuous

SysEx commands (2)

OSC address Arguments
/juno_106_kiwi/modulates val: u7
/juno_106_kiwi/sysex_message val: u7

Performance MIDI

Notes, pitch bend and any CC are also available: /juno_106_kiwi/note/on <note> <velocity>, /juno_106_kiwi/cc/<number> <value>, /juno_106_kiwi/pitchbend <0-16383>, /juno_106_kiwi/program_change <n>.

Limitations

Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.