Skip to content

Roland JU-06A: MIDI CC, NRPN and OSC map

The Roland JU-06A as named OSC addresses — 68 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Roland JU-06A
Vendor Roland
OSC prefix /ju_06a
Source 🎛️ Derived from an Electra One community preset
Revision per pencilresearch canonical CSV
Upstream electra-preset
Driver file devices/roland/ju_06a.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/roland/ju_06a.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /ju_06a/dco_range 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as ju_06a: ask “what can the Roland JU-06A do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (68)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/ju_06a/dco_range 12 0–127 continuous
/ju_06a/dco_lfo_depth 13 0–127 continuous
/ju_06a/dco_pwm 14 0–127 continuous
/ju_06a/dco_lfo_target 15 0–127 continuous
/ju_06a/dco_sqr_switch 16 0–127 continuous
/ju_06a/dco_saw_switch 17 0–127 continuous
/ju_06a/dco_sub_switch 28 0–127 continuous
/ju_06a/dco_sub_lvl 18 0–127 continuous
/ju_06a/dco_nse_lvl 19 0–127 continuous
/ju_06a/hpf_freq 20 0–127 continuous
/ju_06a/vcf_env_polarity 21 0–127 continuous
/ju_06a/vcf_env_depth 22 0–127 continuous
/ju_06a/vcf_lfo 23 0–127 continuous
/ju_06a/vcf_keytrack 24 0–127 continuous
/ju_06a/vca_env 25 0–127 continuous
/ju_06a/vca_lvl 26 0–127 continuous
/ju_06a/lfo_wave 29 0–127 continuous
/ju_06a/lfo_trig 30 0–127 continuous
/ju_06a/lfo_rate 3 0–127 continuous
/ju_06a/lfo_delay 9 0–127 continuous
/ju_06a/env_atk 73 0–127 continuous
/ju_06a/env_dec 75 0–127 continuous
/ju_06a/env_sus 27 0–127 continuous
/ju_06a/env_rel 72 0–127 continuous
/ju_06a/vcf_frq 74 0–127 continuous
/ju_06a/vcf_res 71 0–127 continuous
/ju_06a/dly_time 82 0–127 continuous
/ju_06a/dly_fdbk 83 0–127 continuous
/ju_06a/dly_sw 89 0–127 continuous
/ju_06a/dly_lvl 91 0–127 continuous
/ju_06a/chorus_type 93 0–127 continuous
/ju_06a/poly_mono_unison 86 0–127 continuous
/ju_06a/modwheel 1 0–127 continuous
/ju_06a/expr_pdl 11 0–127 continuous
/ju_06a/sustain 64 0–127 continuous
/ju_06a/portamento 65 0–127 continuous
/ju_06a/portamento_time 5 0–127 continuous
/ju_06a/bend_range 87 0–127 continuous
/ju_06a/clck_sync 88 0–127 continuous
/ju_06a/lfo_delay_time 9 0–127 continuous
/ju_06a/shape 29 0–127 continuous
/ju_06a/voice_mode 86 0–127 continuous
/ju_06a/range 12 0–127 continuous
/ju_06a/lfo 13 0–127 continuous
/ju_06a/pwm 14 0–127 continuous
/ju_06a/pwm_type 15 0–127 continuous
/ju_06a/pulse 16 0–127 continuous
/ju_06a/saw 17 0–127 continuous
/ju_06a/sub 28 0–127 continuous
/ju_06a/sub 18 0–127 continuous
/ju_06a/noise 19 0–127 continuous
/ju_06a/hpf_frequency 20 0–127 continuous
/ju_06a/port_time 5 0–127 continuous
/ju_06a/freq 74 0–127 continuous
/ju_06a/res 71 0–127 continuous
/ju_06a/env_polarity 21 0–127 continuous
/ju_06a/env_mod 22 0–127 continuous
/ju_06a/lfo_mod 23 0–127 continuous
/ju_06a/key_follow 24 0–127 continuous
/ju_06a/gate_env 25 0–127 continuous
/ju_06a/vca_level 26 0–127 continuous
/ju_06a/attack 73 0–127 continuous
/ju_06a/decay 75 0–127 continuous
/ju_06a/release 72 0–127 continuous
/ju_06a/chorus_1 93 0–127 continuous
/ju_06a/delay_on_off 91 0–127 continuous
/ju_06a/delay_time 82 0–127 continuous
/ju_06a/delay_feedback 83 0–127 continuous

Performance MIDI

Notes, pitch bend and any CC are also available: /ju_06a/note/on <note> <velocity>, /ju_06a/cc/<number> <value>, /ju_06a/pitchbend <0-16383>, /ju_06a/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.