Pioneer DJ Toraiz SP-16: MIDI CC, NRPN and OSC map¶
The Pioneer DJ Toraiz SP-16 as named OSC addresses — 35 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Pioneer DJ Toraiz SP-16 |
|---|---|
| Vendor | Pioneer DJ |
| OSC prefix | /toraiz_sp_16 |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/pioneer-dj/toraiz_sp_16.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/pioneer-dj/toraiz_sp_16.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as toraiz_sp_16: ask “what can the Pioneer DJ Toraiz SP-16 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (35)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/toraiz_sp_16/track/volume |
7 | 0–127 | continuous | Track | |
/toraiz_sp_16/track/pan |
10 | 0–127 | continuous | Track | |
/toraiz_sp_16/track/time_stretch |
14 | 0–127 | continuous | Track | |
/toraiz_sp_16/track/loop |
15 | 0–127 | continuous | Track | |
/toraiz_sp_16/track/trigger_mode |
16 | 0–127 | continuous | Track | |
/toraiz_sp_16/track/send_amount |
17 | 0–127 | continuous | Track | |
/toraiz_sp_16/track/mute |
18 | 0–127 | continuous | Track | |
/toraiz_sp_16/playback/pitch |
20 | 0–127 | continuous | Playback | |
/toraiz_sp_16/playback/start |
21 | 0–127 | continuous | Playback | |
/toraiz_sp_16/playback/loop_start |
22 | 0–127 | continuous | Playback | |
/toraiz_sp_16/playback/length |
23 | 0–127 | continuous | Playback | |
/toraiz_sp_16/amp_envelope/velocity |
26 | 0–127 | continuous | Amp envelope | |
/toraiz_sp_16/amp_envelope/attack |
27 | 0–127 | continuous | Amp envelope | |
/toraiz_sp_16/amp_envelope/hold |
28 | 0–127 | continuous | Amp envelope | |
/toraiz_sp_16/amp_envelope/release |
29 | 0–127 | continuous | Amp envelope | |
/toraiz_sp_16/fx1/param_1 |
46 | 0–127 | continuous | FX1 | |
/toraiz_sp_16/fx1/param_2 |
47 | 0–127 | continuous | FX1 | |
/toraiz_sp_16/fx1/param_3 |
48 | 0–127 | continuous | FX1 | |
/toraiz_sp_16/fx1/param_4 |
49 | 0–127 | continuous | FX1 | |
/toraiz_sp_16/fx1/param_5 |
50 | 0–127 | continuous | FX1 | |
/toraiz_sp_16/fx1/param_6 |
51 | 0–127 | continuous | FX1 | |
/toraiz_sp_16/fx2/param_1 |
63 | 0–127 | continuous | FX2 | |
/toraiz_sp_16/fx2/param_2 |
64 | 0–127 | continuous | FX2 | |
/toraiz_sp_16/fx2/param_3 |
65 | 0–127 | continuous | FX2 | |
/toraiz_sp_16/fx2/param_4 |
66 | 0–127 | continuous | FX2 | |
/toraiz_sp_16/fx2/param_5 |
67 | 0–127 | continuous | FX2 | |
/toraiz_sp_16/fx2/param_6 |
68 | 0–127 | continuous | FX2 | |
/toraiz_sp_16/sequence/offset |
54 | 0–127 | continuous | Sequence | |
/toraiz_sp_16/sequence/retrigger_count |
55 | 0–127 | continuous | Sequence | |
/toraiz_sp_16/sequence/retrigger_speed |
56 | 0–127 | continuous | Sequence | |
/toraiz_sp_16/lfo/speed |
60 | 0–127 | continuous | LFO | |
/toraiz_sp_16/lfo/depth |
61 | 0–127 | continuous | LFO | |
/toraiz_sp_16/lfo/phase_offset |
62 | 0–127 | continuous | LFO | |
/toraiz_sp_16/selection/select_scene |
0 | 1–16 | continuous | Selection | |
/toraiz_sp_16/selection/select_pattern |
32 | 1–16 | continuous | Selection |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /toraiz_sp_16/note/on <note> <velocity>, /toraiz_sp_16/cc/<number> <value>, /toraiz_sp_16/pitchbend <0-16383>, /toraiz_sp_16/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.