Skip to content

KORG NTS-3 kaoss pad: MIDI CC, NRPN and OSC map

The KORG NTS-3 kaoss pad as named OSC addresses — 37 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device KORG NTS-3 kaoss pad
Vendor KORG
OSC prefix /nts_3_kaoss_pad
Source 📦 Derived from MIDI Guide (community CC/NRPN data)
Firmware unknown
Revision per pencilresearch canonical CSV
Upstream pencilresearch
Data licence CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors
Driver file devices/korg/nts_3_kaoss_pad.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/korg/nts_3_kaoss_pad.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /nts_3_kaoss_pad/total_fx/pad_x 8191

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as nts_3_kaoss_pad: ask “what can the KORG NTS-3 kaoss pad do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (37)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/nts_3_kaoss_pad/total_fx/pad_x 12 / 44 0–16383 continuous Total FX
/nts_3_kaoss_pad/total_fx/pad_y 13 / 45 0–16383 continuous Total FX
/nts_3_kaoss_pad/total_fx/depth 14 / 46 0–16383 continuous Total FX
/nts_3_kaoss_pad/total_fx/touch 98 0–127 continuous Total FX
/nts_3_kaoss_pad/total_fx/freeze 99 0–127 continuous Total FX
/nts_3_kaoss_pad/fx_1/pad_x 16 / 48 0–16383 continuous FX 1
/nts_3_kaoss_pad/fx_1/pad_y 17 / 49 0–16383 continuous FX 1
/nts_3_kaoss_pad/fx_1/depth 18 / 50 0–16383 continuous FX 1
/nts_3_kaoss_pad/fx_1/selection 80 0–127 continuous FX 1
/nts_3_kaoss_pad/fx_1/touch 104 0–127 continuous FX 1
/nts_3_kaoss_pad/fx_1/freeze 105 0–127 continuous FX 1
/nts_3_kaoss_pad/fx_1/on_off 106 0–127 continuous FX 1
/nts_3_kaoss_pad/fx_2/pad_x 20 / 52 0–16383 continuous FX 2
/nts_3_kaoss_pad/fx_2/pad_y 21 / 53 0–16383 continuous FX 2
/nts_3_kaoss_pad/fx_2/depth 22 / 54 0–16383 continuous FX 2
/nts_3_kaoss_pad/fx_2/selection 81 0–127 continuous FX 2
/nts_3_kaoss_pad/fx_2/touch 108 0–127 continuous FX 2
/nts_3_kaoss_pad/fx_2/freeze 109 0–127 continuous FX 2
/nts_3_kaoss_pad/fx_2/on_off 110 0–127 continuous FX 2
/nts_3_kaoss_pad/fx_3/pad_x 24 / 56 0–16383 continuous FX 3
/nts_3_kaoss_pad/fx_3/pad_y 25 / 57 0–16383 continuous FX 3
/nts_3_kaoss_pad/fx_3/depth 26 / 58 0–16383 continuous FX 3
/nts_3_kaoss_pad/fx_3/selection 82 0–127 continuous FX 3
/nts_3_kaoss_pad/fx_3/touch 112 0–127 continuous FX 3
/nts_3_kaoss_pad/fx_3/freeze 113 0–127 continuous FX 3
/nts_3_kaoss_pad/fx_3/on_off 114 0–127 continuous FX 3
/nts_3_kaoss_pad/fx_4/pad_x 28 / 60 0–16383 continuous FX 4
/nts_3_kaoss_pad/fx_4/pad_y 29 / 61 0–16383 continuous FX 4
/nts_3_kaoss_pad/fx_4/depth 30 / 62 0–16383 continuous FX 4
/nts_3_kaoss_pad/fx_4/selection 83 0–127 continuous FX 4
/nts_3_kaoss_pad/fx_4/touch 116 0–127 continuous FX 4
/nts_3_kaoss_pad/fx_4/freeze 117 0–127 continuous FX 4
/nts_3_kaoss_pad/fx_4/on_off 118 0–127 continuous FX 4
/nts_3_kaoss_pad/settings/bank_select 0 / 32 0–16383 continuous Settings
/nts_3_kaoss_pad/settings/data_entry 6 / 38 0–16383 continuous Settings
/nts_3_kaoss_pad/settings/master_volume 7 / 39 0–16383 continuous Settings
/nts_3_kaoss_pad/settings/input_mute 15 0–127 continuous Settings

Performance MIDI

Notes, pitch bend and any CC are also available: /nts_3_kaoss_pad/note/on <note> <velocity>, /nts_3_kaoss_pad/cc/<number> <value>, /nts_3_kaoss_pad/pitchbend <0-16383>, /nts_3_kaoss_pad/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.