Skip to content

KORG monologue: MIDI CC, NRPN and OSC map

The KORG monologue as named OSC addresses — 45 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device KORG monologue
Vendor KORG
OSC prefix /monologue
Source 🎛️ Derived from an Electra One community preset
Revision per pencilresearch canonical CSV
Upstream electra-preset
Driver file devices/korg/monologue.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/korg/monologue.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /monologue/envelope_generator/envelope_attack 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as monologue: ask “what can the KORG monologue do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (45)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/monologue/envelope_generator/envelope_attack 16 0–127 continuous Envelope generator
/monologue/envelope_generator/envelope_decay 17 0–127 continuous Envelope generator
/monologue/envelope_generator/envelope_intensity 25 0–127 continuous Envelope generator
/monologue/lfo/rate 24 0–127 continuous LFO
/monologue/lfo/depth 26 0–127 continuous LFO
/monologue/general/drive 28 0–127 continuous General
/monologue/vco_2/pitch 35 0–127 continuous VCO 2
/monologue/vco_1/shape 36 0–127 continuous VCO 1
/monologue/vco_2/shape 37 0–127 continuous VCO 2
/monologue/vco_1/level 39 0–127 continuous VCO 1
/monologue/vco_2/level 40 0–127 continuous VCO 2
/monologue/filter/cutoff 43 0–127 continuous Filter
/monologue/filter/resonance 44 0–127 continuous Filter
/monologue/vco_2/octave 49 0–127 continuous VCO 2
/monologue/vco_1/wave 50 0–127 continuous VCO 1
/monologue/vco_2/wave 51 0–127 continuous VCO 2
/monologue/lfo/target 56 0–127 continuous LFO
/monologue/lfo/wave 58 0–127 continuous LFO
/monologue/lfo/mode 59 0–127 continuous LFO
/monologue/general/sync_ring 60 0–127 continuous General
/monologue/envelope_generator/type 61 0–127 continuous Envelope generator
/monologue/envelope_generator/target 62 0–127 continuous Envelope generator
/monologue/cutoff 43 0–127 continuous
/monologue/wave 50 0–127 continuous
/monologue/wave 51 0–127 continuous
/monologue/shape 37 0–127 continuous
/monologue/sync_ring 60 0–127 continuous
/monologue/drive 28 0–127 continuous
/monologue/resonance 44 0–127 continuous
/monologue/shape 36 0–127 continuous
/monologue/octave 49 0–127 continuous
/monologue/pitch 35 -63–64 continuous
/monologue/vco_1 39 0–127 continuous
/monologue/vco_2 40 0–127 continuous
/monologue/attack 16 0–127 continuous
/monologue/decay 17 0–127 continuous
/monologue/int 25 0–127 continuous
/monologue/attack_decay 18 0–0 continuous
/monologue/eg_type 61 0–127 continuous
/monologue/eg_target 62 0–127 continuous
/monologue/wave 58 0–127 continuous
/monologue/mode 59 0–127 continuous
/monologue/rate 24 0–127 continuous
/monologue/depth 26 -63–64 continuous
/monologue/target 56 0–127 continuous

Performance MIDI

Notes, pitch bend and any CC are also available: /monologue/note/on <note> <velocity>, /monologue/cc/<number> <value>, /monologue/pitchbend <0-16383>, /monologue/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.