KORG minilogue xd: MIDI CC, NRPN and OSC map¶
The KORG minilogue xd as named OSC addresses — 65 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | KORG minilogue xd |
|---|---|
| Vendor | KORG |
| OSC prefix | /minilogue_xd |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/korg/minilogue_xd.pencilresearch.fw-unknown.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
Other variants of this device: minilogue_xd.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/korg/minilogue_xd.pencilresearch.fw-unknown.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as minilogue_xd: ask “what can the KORG minilogue xd do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (65)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/minilogue_xd/general/bank_select_msb |
0 / 32 | 0–16383 | continuous | General | |
/minilogue_xd/general/modulation1_joystick_y |
1 | 0–127 | continuous | General | |
/minilogue_xd/general/modulation2_joystick_y |
2 | 0–127 | continuous | General | |
/minilogue_xd/general/portamento |
5 | 0–127 | continuous | General | |
/minilogue_xd/general/data_entry |
6 | 0–127 | continuous | General | |
/minilogue_xd/vca/amp_eg_attack |
16 | 0–127 | continuous | VCA | |
/minilogue_xd/vca/amp_eg_decay |
17 | 0–127 | continuous | VCA | |
/minilogue_xd/vca/amp_eg_sustain |
18 | 0–127 | continuous | VCA | |
/minilogue_xd/vca/amp_eg_release |
19 | 0–127 | continuous | VCA | |
/minilogue_xd/eg/attack |
20 | 0–127 | continuous | EG | |
/minilogue_xd/eg/decay |
21 | 0–127 | continuous | EG | |
/minilogue_xd/eg/int |
22 | 0–127 | continuous | EG | |
/minilogue_xd/eg/target |
23 | 0–127 | continuous | EG | |
/minilogue_xd/lfo/rate |
24 | 0–127 | continuous | LFO | |
/minilogue_xd/lfo/int |
26 | 0–127 | continuous | LFO | |
/minilogue_xd/fx/voice_mode_depth |
59 | 0–127 | continuous | FX | |
/minilogue_xd/fx/mod_fx_time |
28 | 0–127 | continuous | FX | |
/minilogue_xd/fx/mod_fx_depth |
29 | 0–127 | continuous | FX | |
/minilogue_xd/multi/level |
33 | 0–127 | continuous | Multi | |
/minilogue_xd/vco_1/pitch |
34 | 0–127 | continuous | VCO 1 | |
/minilogue_xd/vco_2/pitch |
35 | 0–127 | continuous | VCO 2 | |
/minilogue_xd/vco_1/shape |
36 | 0–127 | continuous | VCO 1 | |
/minilogue_xd/vco_2/shape |
37 | 0–127 | continuous | VCO 2 | |
/minilogue_xd/vco_1/level |
39 | 0–127 | continuous | VCO 1 | |
/minilogue_xd/vco_2/level |
40 | 0–127 | continuous | VCO 2 | |
/minilogue_xd/general/cross_mod_depth |
41 | 0–127 | continuous | General | |
/minilogue_xd/vcf/cutoff |
43 | 0–127 | continuous | VCF | |
/minilogue_xd/vcf/resonance |
44 | 0–127 | continuous | VCF | |
/minilogue_xd/vco_1/octave |
48 | 0–127 | continuous | VCO 1 | |
/minilogue_xd/vco_2/octave |
49 | 0–127 | continuous | VCO 2 | |
/minilogue_xd/vco_1/wave |
50 | 0–127 | continuous | VCO 1 | |
/minilogue_xd/vco_2/wave |
51 | 0–127 | continuous | VCO 2 | |
/minilogue_xd/multi/type |
53 | 0–127 | continuous | Multi | |
/minilogue_xd/multi/shape |
54 | 0–127 | continuous | Multi | |
/minilogue_xd/lfo/target |
56 | 0–127 | continuous | LFO | |
/minilogue_xd/lfo/wave |
57 | 0–127 | continuous | LFO | |
/minilogue_xd/lfo/mode |
58 | 0–127 | continuous | LFO | |
/minilogue_xd/fx/damper |
64 | 0–127 | continuous | FX | |
/minilogue_xd/vcf/sync |
80 | 0–127 | continuous | VCF | |
/minilogue_xd/vcf/ring |
81 | 0–127 | continuous | VCF | |
/minilogue_xd/vcf/cutoff_keytrack |
83 | 0–127 | continuous | VCF | |
/minilogue_xd/vcf/cutoff_drive |
84 | 0–127 | continuous | VCF | |
/minilogue_xd/fx/mod_fx_type |
88 | 0–127 | continuous | FX | |
/minilogue_xd/fx/delay_subtype |
89 | 0–127 | continuous | FX | |
/minilogue_xd/fx/reverb_subtype |
90 | 0–127 | continuous | FX | |
/minilogue_xd/fx/mod_fx_on_off |
92 | 0–127 | continuous | FX | |
/minilogue_xd/fx/delay_on_off |
93 | 0–127 | continuous | FX | |
/minilogue_xd/fx/reverb_on_off |
94 | 0–127 | continuous | FX | |
/minilogue_xd/fx/mod_fx_subtype_for_chorus |
96 | 0–127 | continuous | FX | |
/minilogue_xd/fx/mod_fx_subtype_for_ensemble |
96 | 0–127 | continuous | FX | |
/minilogue_xd/fx/mod_fx_subtype_for_phaser |
96 | 0–127 | continuous | FX | |
/minilogue_xd/fx/mod_fx_subtype_for_flanger |
96 | 0–127 | continuous | FX | |
/minilogue_xd/fx/mod_fx_subtype_for_user |
96 | 0–127 | continuous | FX | |
/minilogue_xd/multi/subtype_select_for_noise |
103 | 0–127 | continuous | Multi | |
/minilogue_xd/multi/subtype_select_for_vpm |
103 | 0–127 | continuous | Multi | |
/minilogue_xd/multi/subtype_select_for_user |
103 | 0–127 | continuous | Multi | |
/minilogue_xd/delay/time |
105 | 0–127 | continuous | Delay | |
/minilogue_xd/delay/depth |
106 | 0–127 | continuous | Delay | |
/minilogue_xd/delay/dry_wet |
107 | 0–127 | continuous | Delay | |
/minilogue_xd/reverb/time |
108 | 0–127 | continuous | Reverb | |
/minilogue_xd/reverb/depth |
109 | 0–127 | continuous | Reverb | |
/minilogue_xd/reverb/dry_wet |
110 | 0–127 | continuous | Reverb | |
/minilogue_xd/cv/in_1 |
118 | 0–127 | continuous | CV | |
/minilogue_xd/cv/in_2 |
119 | 0–127 | continuous | CV | |
/minilogue_xd/general/all_notes_off |
123 | 0–127 | continuous | General |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /minilogue_xd/note/on <note> <velocity>, /minilogue_xd/cc/<number> <value>, /minilogue_xd/pitchbend <0-16383>, /minilogue_xd/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.