KORG M1: MIDI CC, NRPN and OSC map¶
The KORG M1 as named OSC addresses — 76 SysEx commands — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | KORG M1 |
|---|---|
| Vendor | KORG |
| OSC prefix | /m1 |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/korg/m1.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/korg/m1.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as m1: ask “what can the KORG M1 do?” and it reads this map with list_routes. See the MCP guide.
SysEx commands (76)¶
| OSC address | Arguments |
|---|---|
/m1/eg_start_level |
val: u7 |
/m1/eg_att_time |
val: u7 |
/m1/eg_att_level |
val: u7 |
/m1/eg_decay_time |
val: u7 |
/m1/eg_rel_time |
val: u7 |
/m1/eg_rel_level |
val: u7 |
/m1/eg_lev_vel_sen |
val: u7 |
/m1/eg_tim_vel_sen |
val: u7 |
/m1/osc1_waveform |
val: u7 |
/m1/osc_1_oct_4 |
val: u7 |
/m1/osc_1_oct_8 |
val: u7 |
/m1/osc_1_oct_16 |
val: u7 |
/m1/osc2_waveform |
val: u7 |
/m1/osc_2_oct_4 |
val: u7 |
/m1/osc_2_oct_8 |
val: u7 |
/m1/osc_2_oct_16 |
val: u7 |
/m1/osc_1_enable |
val: u7 |
/m1/osc_2_enable |
val: u7 |
/m1/waveform |
val: u7 |
/m1/key_sync |
val: u7 |
/m1/detune |
val: u7 |
/m1/interval |
val: u7 |
/m1/freq |
val: u7 |
/m1/delay |
val: u7 |
/m1/intensity |
val: u7 |
/m1/mode |
val: u7 |
/m1/assign |
val: u7 |
/m1/hold |
val: u7 |
/m1/eg_att_rate |
val: u7 |
/m1/eg_break_point |
val: u7 |
/m1/eg_slope_time |
val: u7 |
/m1/eg_sustain_lev |
val: u7 |
/m1/eg_int_level |
val: u7 |
/m1/eg_time_level |
val: u7 |
/m1/cutoff |
val: u7 |
/m1/eg_intensity |
val: u7 |
/m1/cut_kbd_track |
val: u7 |
/m1/cutoff_track |
val: u7 |
/m1/eg_time_trak |
val: u7 |
/m1/kbd_trk_amp |
val: u7 |
/m1/eg_time |
val: u7 |
/m1/eg_pol_s_at |
val: u7 |
/m1/eg_pol_s_de |
val: u7 |
/m1/eg_pol_s_su |
val: u7 |
/m1/eg_pol_s_re |
val: u7 |
/m1/amp_vel_sen |
val: u7 |
/m1/eg_time_vel |
val: u7 |
/m1/atk_time |
val: u7 |
/m1/atk_level |
val: u7 |
/m1/dec_time |
val: u7 |
/m1/break_point |
val: u7 |
/m1/slope_time |
val: u7 |
/m1/sustain_level |
val: u7 |
/m1/release_time |
val: u7 |
/m1/kbd_track_cntr |
val: u7 |
/m1/eg_pol_s_sl |
val: u7 |
/m1/rel_time |
val: u7 |
/m1/kbd_track_key |
val: u7 |
/m1/f_eg_pol_s_at |
val: u7 |
/m1/f_eg_pol_dec |
val: u7 |
/m1/eg_pol_s_slo |
val: u7 |
/m1/eg_pol_s_rel |
val: u7 |
/m1/pitch |
val: u7 |
/m1/pitch_mg |
val: u7 |
/m1/cutoff_vdf |
val: u7 |
/m1/vdf_mg |
val: u7 |
/m1/vdf_amplitude |
val: u7 |
/m1/pitch_bend |
val: u7 |
/m1/sweep |
val: u7 |
/m1/mg_freq_pitch |
val: u7 |
/m1/vdf |
val: u7 |
/m1/osc_1_on |
val: u7 |
/m1/osc_2_on |
val: u7 |
/m1/key_on |
val: u7 |
/m1/frequency |
val: u7 |
/m1/both |
val: u7 |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /m1/note/on <note> <velocity>, /m1/cc/<number> <value>, /m1/pitchbend <0-16383>, /m1/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.