Skip to content

Kinotone Ghosts: MIDI CC, NRPN and OSC map

The Kinotone Ghosts as named OSC addresses — 27 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Kinotone Ghosts
Vendor Kinotone
OSC prefix /ghosts
Source 📦 Derived from MIDI Guide (community CC/NRPN data)
Firmware unknown
Revision per pencilresearch canonical CSV
Upstream pencilresearch
Data licence CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors
Driver file devices/kinotone/ghosts.pencilresearch.fw-unknown.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/kinotone/ghosts.pencilresearch.fw-unknown.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /ghosts/main_controls/mix 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as ghosts: ask “what can the Kinotone Ghosts do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (27)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/ghosts/main_controls/mix 14 0–127 continuous Main controls
/ghosts/main_controls/volume 15 0–127 continuous Main controls
/ghosts/main_controls/root 16 0–127 continuous Main controls
/ghosts/main_controls/chord 17 0–127 continuous Main controls
/ghosts/main_controls/tone 18 0–127 continuous Main controls
/ghosts/main_controls/decay 19 0–127 continuous Main controls
/ghosts/touch_controls/touch_1 20 0–127 continuous Touch controls
/ghosts/touch_controls/touch_2 21 0–127 continuous Touch controls
/ghosts/main_controls/position 22 0–127 continuous Main controls
/ghosts/main_controls/voicing 23 0–127 continuous Main controls
/ghosts/reverb/mix_and_placement 24 0–127 continuous Reverb
/ghosts/reverb/time_reverb_decay 25 0–127 continuous Reverb
/ghosts/touch_controls/touch_pre_post 26 0–127 continuous Touch controls
/ghosts/touch_controls/touch_3 27 0–127 continuous Touch controls
/ghosts/hidden_controls/limiter_threshold 28 0–127 continuous Hidden controls
/ghosts/hidden_controls/mic_level 29 0–127 continuous Hidden controls
/ghosts/hidden_controls/input_filter 30 0–127 continuous Hidden controls
/ghosts/hidden_controls/exciter_type 31 0–127 continuous Hidden controls
/ghosts/touch_controls/touch_mode 32 0–127 continuous Touch controls
/ghosts/model/model 33 0–127 continuous Model
/ghosts/microphone/mic_on_off 34 0–127 continuous Microphone
/ghosts/other/ignore_midi_clock 51 0–127 continuous Other
/ghosts/other/ignore_midi_transport_start_stop 52 0–127 continuous Other
/ghosts/endless_loop/clear_endless_loop 60 0–127 continuous Endless Loop
/ghosts/footswitches/touch_footswitch_endless_loop 80 127–127 continuous Footswitches
/ghosts/footswitches/touch_footswitch_all_other_touch_modes 80 0–127 continuous Footswitches
/ghosts/footswitches/bypass_footswitch 81 0–127 continuous Footswitches

Performance MIDI

Notes, pitch bend and any CC are also available: /ghosts/note/on <note> <velocity>, /ghosts/cc/<number> <value>, /ghosts/pitchbend <0-16383>, /ghosts/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.