Skip to content

Empress Reverb: MIDI CC, NRPN and OSC map

The Empress Reverb as named OSC addresses — 59 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Empress Reverb
Vendor Empress
OSC prefix /reverb
Source 🎛️ Derived from an Electra One community preset
Revision per pencilresearch canonical CSV
Upstream electra-preset
Driver file devices/empress/reverb.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/empress/reverb.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /reverb/simulate_exp 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as reverb: ask “what can the Empress Reverb do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (59)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/reverb/simulate_exp 10 0–127 continuous
/reverb/load_preset 11 0–127 continuous
/reverb/mode 20 0–127 continuous
/reverb/decay_time 21 0–127 continuous
/reverb/mix 22 0–127 continuous
/reverb/volume 23 0–127 continuous
/reverb/low 24 0–127 continuous
/reverb/hi 25 0–127 continuous
/reverb/thing1 26 0–127 continuous
/reverb/thing2 27 0–127 continuous
/reverb/select_btn 35 0–127 continuous
/reverb/scroll_btn 36 0–127 continuous
/reverb/bypass_btn 37 0–127 continuous
/reverb/save_btn 38 0–127 continuous
/reverb/save_preset 39 0–127 continuous
/reverb/midi_clock 51 0–127 continuous
/reverb/engage_bypass 60 0–127 continuous
/reverb/reverb_type 20 0–127 continuous
/reverb/low_damping 24 0–127 continuous
/reverb/hi_damping 25 0–127 continuous
/reverb/save_button 38 0–127 continuous
/reverb/synced 51 0–127 continuous
/reverb/bypass_switch 37 0–127 continuous
/reverb/select_switch 35 0–127 continuous
/reverb/scroll_switch 36 0–127 continuous
/reverb/activate_pedal 60 0–127 continuous
/reverb/lowcut 30 0–127 continuous
/reverb/high_cut 29 0–127 continuous
/reverb/er_spin 24 0–127 continuous
/reverb/shape 7 / 39 0–100 continuous
/reverb/reflect 6 / 38 0–16383 continuous
/reverb/diffuse_level 3 / 35 0–16383 continuous
/reverb/frequency 12 / 44 0–16383 continuous
/reverb/width 13 / 45 50–900 continuous
/reverb/spin_amount 8 / 40 20–550 continuous
/reverb/spin_rate 9 / 41 0–16383 continuous
/reverb/dry_wet 5 / 37 0–1000 continuous
/reverb/hifilter 27 0–127 continuous
/reverb/hifilter_type 28 0–127 continuous
/reverb/hifilter_freq 10 / 42 0–16383 continuous
/reverb/hishelf_gain 11 / 43 20–100 continuous
/reverb/chorus 20 0–127 continuous
/reverb/chorus_amount 0 / 32 1–400 continuous
/reverb/lowshelf 31 0–127 continuous
/reverb/lowshelf_freq 14 / 46 0–16383 continuous
/reverb/lowshelf_gain 15 / 47 20–100 continuous
/reverb/diffusion 4 / 36 1–960 continuous
/reverb/scale 18 / 50 50–1000 continuous
/reverb/chorus_rate 1 / 33 0–16383 continuous
/reverb/predelay 16 / 48 0–16383 continuous
/reverb/size_smoothing 52 0–127 continuous
/reverb/decaytime 2 / 34 0–16383 continuous
/reverb/freeze 26 0–127 continuous
/reverb/stereo_image 19 / 51 0–1200 continuous
/reverb/room_size 17 / 49 2–5000 continuous
/reverb/flat 25 0–127 continuous
/reverb/cut 21 0–127 continuous
/reverb/density 22 0–127 continuous
/reverb/device_on 23 0–127 continuous

Performance MIDI

Notes, pitch bend and any CC are also available: /reverb/note/on <note> <velocity>, /reverb/cc/<number> <value>, /reverb/pitchbend <0-16383>, /reverb/program_change <n>.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.