Dave Smith Instruments Pro 3: MIDI CC, NRPN and OSC map¶
The Dave Smith Instruments Pro 3 as named OSC addresses — 123 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Dave Smith Instruments Pro 3 |
|---|---|
| Vendor | Dave Smith Instruments |
| OSC prefix | /pro_3 |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/dave-smith-instruments/pro_3.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/dave-smith-instruments/pro_3.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as pro_3: ask “what can the Dave Smith Instruments Pro 3 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (123)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/pro_3/general/bank_select_course |
0 | 0–127 | continuous | General | |
/pro_3/general/modwheel |
1 | 0–127 | continuous | General | |
/pro_3/general/breath_controller |
2 | 0–127 | continuous | General | |
/pro_3/general/bpm |
3 | 0–127 | continuous | General | |
/pro_3/general/foot_controller |
4 | 0–127 | continuous | General | |
/pro_3/general/glide_portamento |
5 | 0–127 | continuous | General | |
/pro_3/general/data_entry_msb |
6 | 0–127 | continuous | General | |
/pro_3/general/volume |
7 | 0–127 | continuous | General | |
/pro_3/general/audio_in_level |
8 | 0–127 | continuous | General | |
/pro_3/general/audio_in_gain |
9 | 0–127 | continuous | General | |
/pro_3/general/unassigned |
10 | 0–127 | continuous | General | |
/pro_3/general/expression |
11 | 0–127 | continuous | General | |
/pro_3/general/voice_volume |
12 | 0–127 | continuous | General | |
/pro_3/general/paraphonic_on_off |
13 | 0–127 | continuous | General | |
/pro_3/general/slider_1_position |
14 | 0–127 | continuous | General | |
/pro_3/fx/1_on_off |
16 | 0–127 | continuous | FX | |
/pro_3/fx/1_type |
17 | 0–127 | continuous | FX | |
/pro_3/fx/1_mix |
18 | 0–127 | continuous | FX | |
/pro_3/fx/1_param_1 |
19 | 0–127 | continuous | FX | |
/pro_3/fx/1_param_2 |
20 | 0–127 | continuous | FX | |
/pro_3/fx/1_param_3 |
21 | 0–127 | continuous | FX | |
/pro_3/fx/1_sync_on_off |
22 | 0–127 | continuous | FX | |
/pro_3/fx/1_sync_rate |
23 | 0–127 | continuous | FX | |
/pro_3/fx/2_on_off |
24 | 0–127 | continuous | FX | |
/pro_3/fx/2_select |
25 | 0–127 | continuous | FX | |
/pro_3/fx/2_mix |
26 | 0–127 | continuous | FX | |
/pro_3/fx/2_param_1 |
27 | 0–127 | continuous | FX | |
/pro_3/fx/2_param_2 |
28 | 0–127 | continuous | FX | |
/pro_3/fx/2_param_3 |
29 | 0–127 | continuous | FX | |
/pro_3/fx/2_sync_on_off |
30 | 0–127 | continuous | FX | |
/pro_3/fx/2_sync_rate |
31 | 0–127 | continuous | FX | |
/pro_3/general/bank_select_fine |
32 | 0–127 | continuous | General | |
/pro_3/filter/cutoff |
33 | 0–127 | continuous | Filter | |
/pro_3/filter/resonance |
34 | 0–127 | continuous | Filter | |
/pro_3/filter/keyboard_tracking |
35 | 0–127 | continuous | Filter | |
/pro_3/filter/drive |
36 | 0–127 | continuous | Filter | |
/pro_3/filter/type |
37 | 0–127 | continuous | Filter | |
/pro_3/general/date_entry_lsb |
38 | 0–127 | continuous | General | |
/pro_3/vca/env_amount |
40 | 0–127 | continuous | VCA | |
/pro_3/vca/env_velocity_on_off |
41 | 0–127 | continuous | VCA | |
/pro_3/vca/env_delay |
42 | 0–127 | continuous | VCA | |
/pro_3/vca/env_attack |
43 | 0–127 | continuous | VCA | |
/pro_3/vca/env_decay |
44 | 0–127 | continuous | VCA | |
/pro_3/vca/env_sustain |
45 | 0–127 | continuous | VCA | |
/pro_3/vca/env_release |
46 | 0–127 | continuous | VCA | |
/pro_3/filter/fltr_env_amount |
47 | 0–127 | continuous | Filter | |
/pro_3/filter/fltr_env_vel_on_off |
48 | 0–127 | continuous | Filter | |
/pro_3/filter/fltr_env_delay |
49 | 0–127 | continuous | Filter | |
/pro_3/filter/fltr_env_attack |
50 | 0–127 | continuous | Filter | |
/pro_3/filter/fltr_env_decay |
117 | 0–127 | continuous | Filter | |
/pro_3/filter/fltr_env_sustain |
52 | 0–127 | continuous | Filter | |
/pro_3/filter/fltr_env_release |
53 | 0–127 | continuous | Filter | |
/pro_3/oscillator_1/osc_1_glide_rate |
54 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_2/osc_2_glide_rate |
55 | 0–127 | continuous | Oscillator 2 | |
/pro_3/oscillator_3/osc_3_glide_rate |
56 | 0–127 | continuous | Oscillator 3 | |
/pro_3/general/swing |
57 | 0–127 | continuous | General | |
/pro_3/arp/arp_on_off |
58 | 0–127 | continuous | Arp | |
/pro_3/arp/arp_mode |
59 | 0–127 | continuous | Arp | |
/pro_3/arp/arp_range |
60 | 0–127 | continuous | Arp | |
/pro_3/arp/arp_relatch_on_off |
61 | 0–127 | continuous | Arp | |
/pro_3/arp/clock_divide |
62 | 0–127 | continuous | Arp | |
/pro_3/arp/arp_repeats |
63 | 0–127 | continuous | Arp | |
/pro_3/general/sustain_pedal |
64 | 0–127 | continuous | General | |
/pro_3/general/oscillator_glide_on_off |
65 | 0–127 | continuous | General | |
/pro_3/oscillator_1/osc_1_octave |
66 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_1/osc_1_fine_frequency |
67 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_1/osc_1_level |
68 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_1/osc_1_shape |
69 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_1/osc_1_shape_mod |
70 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_1/osc_1_sync_on_off |
71 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_1/osc_1_slop |
72 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_1/noise_level |
73 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_1/brightness |
74 | 0–127 | continuous | Oscillator 1 | |
/pro_3/oscillator_2/osc_2_octave |
75 | 0–127 | continuous | Oscillator 2 | |
/pro_3/oscillator_2/osc_2_fine_frequency |
76 | 0–127 | continuous | Oscillator 2 | |
/pro_3/oscillator_2/osc_2_level |
77 | 0–127 | continuous | Oscillator 2 | |
/pro_3/oscillator_2/osc_2_shape |
78 | 0–127 | continuous | Oscillator 2 | |
/pro_3/oscillator_2/osc_2_shape_mod |
79 | 0–127 | continuous | Oscillator 2 | |
/pro_3/oscillator_2/osc_2_sync_on_off |
80 | 0–127 | continuous | Oscillator 2 | |
/pro_3/oscillator_2/osc_2_slop |
81 | 0–127 | continuous | Oscillator 2 | |
/pro_3/oscillator_3/osc_3_octave |
82 | 0–127 | continuous | Oscillator 3 | |
/pro_3/oscillator_3/osc_3_fine_frequency |
83 | 0–127 | continuous | Oscillator 3 | |
/pro_3/oscillator_3/osc_3_level |
84 | 0–127 | continuous | Oscillator 3 | |
/pro_3/oscillator_3/osc_3_shape |
85 | 0–127 | continuous | Oscillator 3 | |
/pro_3/oscillator_3/osc_3_shape_mod |
86 | 0–127 | continuous | Oscillator 3 | |
/pro_3/oscillator_3/osc_3_lfo_mod_on_off |
87 | 0–127 | continuous | Oscillator 3 | |
/pro_3/oscillator_3/osc_3_slop |
88 | 0–127 | continuous | Oscillator 3 | |
/pro_3/miscellaneous/feedback_amount |
89 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/feedback_tuning |
90 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/distortion_amount |
91 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/grunge_on_off |
92 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/ext_in_follower_attack |
93 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/ext_in_follower_release |
94 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/ext_in_gain_threshold |
95 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/date_inc |
96 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/data_dec |
97 | 0–127 | continuous | Miscellaneous | |
/pro_3/general/nrpn_param_lsb |
98 | 0–127 | continuous | General | |
/pro_3/general/nrpn_param_msb |
99 | 0–127 | continuous | General | |
/pro_3/general/rpn_param_lsb |
100 | 0–127 | continuous | General | |
/pro_3/general/rpn_param_msb |
101 | 0–127 | continuous | General | |
/pro_3/miscellaneous/ladder_res_comp |
102 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/state_variable_filter_mode |
103 | 0–127 | continuous | Miscellaneous | |
/pro_3/miscellaneous/state_variable_filter_normal_bandpass |
104 | 0–127 | continuous | Miscellaneous | |
/pro_3/lfo/1_freq |
105 | 0–127 | continuous | LFO | |
/pro_3/lfo/1_amount |
106 | 0–127 | continuous | LFO | |
/pro_3/lfo/1_shape |
107 | 0–127 | continuous | LFO | |
/pro_3/lfo/1_sync_on_off |
108 | 0–127 | continuous | LFO | |
/pro_3/lfo/2_frequency |
109 | 0–127 | continuous | LFO | |
/pro_3/lfo/2_amount |
110 | 0–127 | continuous | LFO | |
/pro_3/lfo/2_shape |
111 | 0–127 | continuous | LFO | |
/pro_3/lfo/2_sync_on_off |
112 | 0–127 | continuous | LFO | |
/pro_3/lfo/3_frequency |
113 | 0–127 | continuous | LFO | |
/pro_3/lfo/3_amount |
114 | 0–127 | continuous | LFO | |
/pro_3/lfo/3_shape |
115 | 0–127 | continuous | LFO | |
/pro_3/lfo/3_sync_on_off |
116 | 0–127 | continuous | LFO | |
/pro_3/general/all_sound_off |
120 | 0–127 | continuous | General | |
/pro_3/general/reset_controllers |
121 | 0–127 | continuous | General | |
/pro_3/general/local_control_on_off |
122 | 0–127 | continuous | General | |
/pro_3/general/all_notes_off |
123 | 0–127 | continuous | General | |
/pro_3/general/omni_mode_off |
124 | 0–127 | continuous | General | |
/pro_3/general/omni_mode_on |
125 | 0–127 | continuous | General | |
/pro_3/general/mono_mode_on |
126 | 0–127 | continuous | General | |
/pro_3/general/poly_mode_on |
127 | 0–127 | continuous | General |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /pro_3/note/on <note> <velocity>, /pro_3/cc/<number> <value>, /pro_3/pitchbend <0-16383>, /pro_3/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.