Chase Bliss Clean: MIDI CC, NRPN and OSC map¶
The Chase Bliss Clean as named OSC addresses — 43 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Chase Bliss Clean |
|---|---|
| Vendor | Chase Bliss |
| OSC prefix | /clean |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/chase-bliss/clean.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/chase-bliss/clean.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as clean: ask “what can the Chase Bliss Clean do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (43)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/clean/knobs/dynamics |
14 | 0–127 | continuous | Knobs | |
/clean/knobs/sensitivity |
15 | 0–127 | continuous | Knobs | |
/clean/knobs/wet |
16 | 0–127 | continuous | Knobs | |
/clean/knobs/attack |
17 | 0–127 | continuous | Knobs | |
/clean/knobs/eq |
18 | 0–127 | continuous | Knobs | |
/clean/knobs/dry |
19 | 0–127 | continuous | Knobs | |
/clean/knobs/ramp_speed |
20 | 0–127 | continuous | Knobs | |
/clean/toggles/release |
21 | 0–127 | continuous | Toggles | |
/clean/toggles/mode |
22 | 0–127 | continuous | Toggles | |
/clean/toggles/physics |
23 | 0–127 | continuous | Toggles | |
/clean/foot_switches/bypass |
102 | 0–127 | continuous | Foot Switches | |
/clean/foot_switches/swell |
103 | 0–127 | continuous | Foot Switches | |
/clean/foot_switches/alt_menu |
104 | 0–127 | continuous | Foot Switches | |
/clean/foot_switches/dynamics_max |
106 | 0–127 | continuous | Foot Switches | |
/clean/general/expression_over_midi |
100 | 0–127 | continuous | General | |
/clean/general/preset_save |
111 | 0–122 | continuous | General | |
/clean/general/ramp_bounce |
52 | 0–127 | continuous | General | |
/clean/general/factory_reset |
56 | 0–127 | continuous | General | |
/clean/hidden_options/noise_gate_release |
24 | 0–127 | continuous | Hidden Options | |
/clean/hidden_options/noise_gate_threshold |
25 | 0–127 | continuous | Hidden Options | |
/clean/hidden_options/swell_in |
26 | 0–127 | continuous | Hidden Options | |
/clean/hidden_options/user_release |
27 | 0–127 | continuous | Hidden Options | |
/clean/hidden_options/balance_filter |
28 | 0–127 | continuous | Hidden Options | |
/clean/hidden_options/swell_out |
29 | 0–127 | continuous | Hidden Options | |
/clean/hidden_options/envelope_mode |
31 | 0–127 | continuous | Hidden Options | |
/clean/hidden_options/shifty_mode |
32 | 0–3 | continuous | Hidden Options | |
/clean/hidden_options/spread_routing |
33 | 0–127 | continuous | Hidden Options | |
/clean/ramping/dynamics |
61 | 0–127 | continuous | Ramping | |
/clean/ramping/attack |
62 | 0–127 | continuous | Ramping | |
/clean/ramping/eq |
63 | 0–127 | continuous | Ramping | |
/clean/ramping/dry |
64 | 0–127 | continuous | Ramping | |
/clean/ramping/wet |
65 | 0–127 | continuous | Ramping | |
/clean/ramping/bounce |
66 | 0–127 | continuous | Ramping | |
/clean/ramping/sweep |
67 | 0–127 | continuous | Ramping | |
/clean/ramping/polarity |
68 | 0–127 | continuous | Ramping | |
/clean/customize/miso |
71 | 0–127 | continuous | Customize | |
/clean/customize/spread |
72 | 0–127 | continuous | Customize | |
/clean/customize/latch |
73 | 0–127 | continuous | Customize | |
/clean/customize/sidechain |
74 | 0–127 | continuous | Customize | |
/clean/customize/noise_gate |
75 | 0–127 | continuous | Customize | |
/clean/customize/motion |
76 | 0–127 | continuous | Customize | |
/clean/customize/swell_aux |
77 | 0–127 | continuous | Customize | |
/clean/customize/dusty |
78 | 0–127 | continuous | Customize |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /clean/note/on <note> <velocity>, /clean/cc/<number> <value>, /clean/pitchbend <0-16383>, /clean/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.