Skip to content

Behringer WAVE V.1: MIDI CC, NRPN and OSC map

The Behringer WAVE V.1 as named OSC addresses — 23 CC, 34 NRPN — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.

Device Behringer WAVE V.1
Vendor Behringer
OSC prefix /wave_v_1
Source 🎛️ Derived from an Electra One community preset
Revision per Electra preset
Upstream electra-preset
Driver file devices/behringer/wave_v_1.json

Not tested on the device yet

This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.

How do you control it?

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/behringer/wave_v_1.json --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /wave_v_1/wave_select 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as wave_v_1: ask “what can the Behringer WAVE V.1 do?” and it reads this map with list_routes. See the MCP guide.

MIDI CC and NRPN parameters (57)

OSC address CC NRPN (MSB/LSB) Range Nature Section
/wave_v_1/wave_select 26 0–127 continuous
/wave_v_1/wavetable 0 / 0 0–127 continuous
/wave_v_1/sub_osc_wave 27 0–127 continuous
/wave_v_1/sub_detu_mode 0 / 28 0–127 continuous
/wave_v_1/upper_wt_slect 0 / 12 0–127 continuous
/wave_v_1/sub_osc_mode 0 / 13 0–127 continuous
/wave_v_1/basis 8 0–127 continuous
/wave_v_1/env_1 18 0–127 continuous
/wave_v_1/env_1 19 0–127 continuous
/wave_v_1/env_1 20 0–127 continuous
/wave_v_1/env_1 21 0–127 continuous
/wave_v_1/env_3 15 0–127 continuous
/wave_v_1/env_3 16 0–127 continuous
/wave_v_1/env_3_att 17 0–127 continuous
/wave_v_1/env1_wave 30 0–127 continuous
/wave_v_1/vcf_cutoff 74 0–127 continuous
/wave_v_1/wave_res 71 0–127 continuous
/wave_v_1/env_1_vcf 28 0–127 continuous
/wave_v_1/env_2 22 0–127 continuous
/wave_v_1/env_2 23 0–127 continuous
/wave_v_1/env_2 24 0–127 continuous
/wave_v_1/env_2 25 0–127 continuous
/wave_v_1/env_2_vca 29 0–127 continuous
/wave_v_1/delay 12 0–127 continuous
/wave_v_1/rate 14 0–127 continuous
/wave_v_1/shape 13 0–127 continuous
/wave_v_1/lfo_mode 0 / 11 0–127 continuous
/wave_v_1/osc_mode 0 / 10 0–127 continuous
/wave_v_1/firmware 0 / 9 0–127 continuous
/wave_v_1/wave 0 / 14 0–127 continuous
/wave_v_1/filter 0 / 15 0–127 continuous
/wave_v_1/vca 0 / 16 0–127 continuous
/wave_v_1/wave 0 / 17 0–127 continuous
/wave_v_1/filter 0 / 18 0–127 continuous
/wave_v_1/destination 0 / 20 0–127 continuous
/wave_v_1/interval 0 / 21 0–127 continuous
/wave_v_1/destination 0 / 5 0–127 continuous
/wave_v_1/mw_to_amp 0 / 19 0–127 continuous
/wave_v_1/filter 0 / 26 0–127 continuous
/wave_v_1/amp 0 / 27 0–127 continuous
/wave_v_1/aftertouch 0 / 22 0–127 continuous
/wave_v_1/aftertouch 0 / 23 0–127 continuous
/wave_v_1/aftertouch 0 / 24 0–127 continuous
/wave_v_1/aftertouch 0 / 25 0–127 continuous
/wave_v_1/pitch_mw_osc 0 / 29 0–127 continuous
/wave_v_1/pitch_mw_sub 0 / 30 0–127 continuous
/wave_v_1/env_3_osc 0 / 31 0–127 continuous
/wave_v_1/env_3_sub 0 / 32 0–127 continuous
/wave_v_1/split_point 0 / 1 0–99 continuous
/wave_v_1/keyboard_mode 0 / 2 0–9 discrete
/wave_v_1/tuning 0 / 4 0–99 continuous
/wave_v_1/arp_seq_speed 0 / 46 0–120 continuous
/wave_v_1/clock 0 / 43 0–127 continuous
/wave_v_1/gate 0 / 44 0–99 continuous
/wave_v_1/division 0 / 45 0–6 discrete
/wave_v_1/arp_seq_mode 0 / 42 0–127 continuous
/wave_v_1/sustain 64 0–127 continuous

Performance MIDI

Notes, pitch bend and any CC are also available: /wave_v_1/note/on <note> <velocity>, /wave_v_1/cc/<number> <value>, /wave_v_1/pitchbend <0-16383>, /wave_v_1/program_change <n>.

Limitations

Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.