Behringer Pro 800: MIDI CC, NRPN and OSC map¶
The Behringer Pro 800 as named OSC addresses — 102 CC, 1 SysEx commands — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Behringer Pro 800 |
|---|---|
| Vendor | Behringer |
| OSC prefix | /pro_800 |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per pencilresearch canonical CSV |
| Upstream | electra-preset |
| Driver file | devices/behringer/pro_800.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/behringer/pro_800.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as pro_800: ask “what can the Behringer Pro 800 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (103)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/pro_800/banksel |
continuous | ||||
/pro_800/mod_wheel |
1 | 0–127 | continuous | ||
/pro_800/breath |
2 | 0–127 | continuous | ||
/pro_800/master_tune |
3 | 0–127 | continuous | ||
/pro_800/nrpn_data_msb |
6 | 0–127 | continuous | ||
/pro_800/mainvolume |
7 | 0–127 | continuous | ||
/pro_800/osca_freq |
80 | 0–127 | continuous | ||
/pro_800/osca_vol |
81 | 0–127 | continuous | ||
/pro_800/oscapw |
82 | 0–127 | continuous | ||
/pro_800/oscb_freq |
83 | 0–127 | continuous | ||
/pro_800/oscb_vol |
84 | 0–127 | continuous | ||
/pro_800/oscbpw |
85 | 0–127 | continuous | ||
/pro_800/oscb_fine |
86 | 0–127 | continuous | ||
/pro_800/vcf_freq |
87 | 0–127 | continuous | ||
/pro_800/vcf_reso |
88 | 0–127 | continuous | ||
/pro_800/vcfen_vamount |
89 | 0–127 | continuous | ||
/pro_800/vcf_rel |
90 | 0–127 | continuous | ||
/pro_800/vcf_sus |
91 | 0–127 | continuous | ||
/pro_800/vcf_dec |
92 | 0–127 | continuous | ||
/pro_800/vcf_atck |
93 | 0–127 | continuous | ||
/pro_800/vca_rel |
94 | 0–127 | continuous | ||
/pro_800/vca_sus |
95 | 0–127 | continuous | ||
/pro_800/vca_dec |
100 | 0–127 | continuous | ||
/pro_800/vca_atck |
101 | 0–127 | continuous | ||
/pro_800/pmod_filter_envamount |
102 | 0–127 | continuous | ||
/pro_800/pmod_osc_bamount |
103 | 0–127 | continuous | ||
/pro_800/lfo_freq |
104 | 0–127 | continuous | ||
/pro_800/lfo_amount |
105 | 0–127 | continuous | ||
/pro_800/glide |
106 | 0–127 | continuous | ||
/pro_800/vca_vel |
107 | 0–127 | continuous | ||
/pro_800/vcf_vel |
108 | 0–127 | continuous | ||
/pro_800/moddelay |
109 | 0–127 | continuous | ||
/pro_800/vib_freq |
110 | 0–127 | continuous | ||
/pro_800/vib_amt |
111 | 0–127 | continuous | ||
/pro_800/unison_detune |
112 | 0–127 | continuous | ||
/pro_800/noise |
113 | 0–127 | continuous | ||
/pro_800/nrpn_data_lsb |
38 | 0–127 | continuous | ||
/pro_800/vca_aftertouch |
114 | 0–127 | continuous | ||
/pro_800/vcf_aftertouch |
115 | 0–127 | continuous | ||
/pro_800/osca_saw |
49 | 0–127 | continuous | ||
/pro_800/osca_square |
50 | 0–127 | continuous | ||
/pro_800/oscb_saw |
51 | 0–127 | continuous | ||
/pro_800/osbb_tri |
52 | 0–127 | continuous | ||
/pro_800/osbb_square |
53 | 0–127 | continuous | ||
/pro_800/oscb_sync |
54 | 0–127 | continuous | ||
/pro_800/pmod_freq_a |
55 | 0–127 | continuous | ||
/pro_800/pmod_vcf |
56 | 0–127 | continuous | ||
/pro_800/lfo_shape |
57 | 0–127 | continuous | ||
/pro_800/lfo_speed |
58 | 0–127 | continuous | ||
/pro_800/lfo_targets |
59 | 0–127 | continuous | ||
/pro_800/vcf_keyboard |
60 | 0–127 | continuous | ||
/pro_800/vcfenv_exp |
61 | 0–127 | continuous | ||
/pro_800/vcfenv_speed |
62 | 0–127 | continuous | ||
/pro_800/vcaenv_exp |
63 | 0–127 | continuous | ||
/pro_800/sustainpedal |
64 | 0–127 | continuous | ||
/pro_800/unison |
65 | 0–127 | continuous | ||
/pro_800/bendertarget |
66 | 0–127 | continuous | ||
/pro_800/modwheel_amount |
67 | 0–127 | continuous | ||
/pro_800/chromatic_pitch_a |
68 | 0–127 | continuous | ||
/pro_800/chromatic_pitch_b |
69 | 0–127 | continuous | ||
/pro_800/modwheel_target |
70 | 0–127 | continuous | ||
/pro_800/vibrato_target |
71 | 0–127 | continuous | ||
/pro_800/vcaenv_speed |
72 | 0–127 | continuous | ||
/pro_800/arp_mode |
73 | 0–127 | continuous | ||
/pro_800/lfo_dest_freq |
74 | 0–127 | continuous | ||
/pro_800/lfo_dest_filter |
75 | 0–127 | continuous | ||
/pro_800/lfo_dest_pwm |
76 | 0–127 | continuous | ||
/pro_800/nrpn_dataincrement |
96 | 0–127 | continuous | ||
/pro_800/nrpn_datadecrement |
97 | 0–127 | continuous | ||
/pro_800/nrpn_param_lsb |
98 | 0–127 | continuous | ||
/pro_800/nrpn_param_msb |
99 | 0–127 | continuous | ||
/pro_800/lfo_aftertouch |
116 | 0–127 | continuous | ||
/pro_800/allsoundsoff |
120 | 0–127 | continuous | ||
/pro_800/allnotesoff |
123 | 0–127 | continuous | ||
/pro_800/oscillators/osc_a_freq |
80 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/osc_b_freq |
83 | 0–127 | continuous | Oscillators | |
/pro_800/pmod_flt_amt |
102 | 0–127 | continuous | ||
/pro_800/oscillators/osc_a_vol |
81 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/osc_b_vol |
84 | 0–127 | continuous | Oscillators | |
/pro_800/pmod_osc_b_amt |
103 | 0–127 | continuous | ||
/pro_800/mod_delay |
109 | 0–127 | continuous | ||
/pro_800/oscillators/osc_a_pw |
82 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/osc_b_pw |
85 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/noise |
71 | 0–127 | continuous | Oscillators | |
/pro_800/oscillators/osc_b_fine |
86 | 0–127 | continuous | Oscillators | |
/pro_800/vcf_env_amount |
89 | 0–127 | continuous | ||
/pro_800/lfo_dest_filt |
75 | 0–127 | continuous | ||
/pro_800/vca_env |
101 | 0–127 | continuous | ||
/pro_800/vca_env |
100 | 0–127 | continuous | ||
/pro_800/vca_env |
95 | 0–127 | continuous | ||
/pro_800/vca_env |
94 | 0–127 | continuous | ||
/pro_800/bank_a_b_c_d |
0 | 0–127 | continuous | ||
/pro_800/vcf_env |
93 | 0–127 | continuous | ||
/pro_800/vcf_env |
92 | 0–127 | continuous | ||
/pro_800/vcf_env |
91 | 0–127 | continuous | ||
/pro_800/vcf_env |
90 | 0–127 | continuous | ||
/pro_800/osc_a_saw |
48 | 0–127 | continuous | ||
/pro_800/osc_a_saw |
49 | 0–127 | continuous | ||
/pro_800/osc_a_square |
50 | 0–127 | continuous | ||
/pro_800/osc_b_saw |
51 | 0–127 | continuous | ||
/pro_800/osc_b_tri |
52 | 0–127 | continuous | ||
/pro_800/osc_b_square |
53 | 0–127 | continuous | ||
/pro_800/osc_b_sync |
54 | 0–127 | continuous |
SysEx commands (1)¶
| OSC address | Arguments |
|---|---|
/pro_800/vcf_freq |
val: u7 |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /pro_800/note/on <note> <velocity>, /pro_800/cc/<number> <value>, /pro_800/pitchbend <0-16383>, /pro_800/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.