Arturia Vocoder V: MIDI CC, NRPN and OSC map¶
The Arturia Vocoder V as named OSC addresses — 49 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Arturia Vocoder V |
|---|---|
| Vendor | Arturia |
| OSC prefix | /vocoder_v |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/arturia/vocoder_v.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/arturia/vocoder_v.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as vocoder_v: ask “what can the Arturia Vocoder V do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (49)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/vocoder_v/waveform |
2 | 0–127 | continuous | ||
/vocoder_v/shape |
3 | 0–127 | continuous | ||
/vocoder_v/frequency |
4 | 0–127 | continuous | ||
/vocoder_v/sync |
5 | 0–127 | continuous | ||
/vocoder_v/level |
6 | 0–127 | continuous | ||
/vocoder_v/osc_fm_2_1 |
18 | 0–127 | continuous | ||
/vocoder_v/waveform |
8 | 0–127 | continuous | ||
/vocoder_v/shape |
9 | 0–127 | continuous | ||
/vocoder_v/fixed |
10 | 0–127 | continuous | ||
/vocoder_v/frequency |
11 | 0–127 | continuous | ||
/vocoder_v/fine |
12 | 0–127 | continuous | ||
/vocoder_v/level |
13 | 0–127 | continuous | ||
/vocoder_v/bend_range |
14 | 0–127 | continuous | ||
/vocoder_v/glide |
15 | 0–127 | continuous | ||
/vocoder_v/attack |
16 | 0–127 | continuous | ||
/vocoder_v/release |
17 | 0–127 | continuous | ||
/vocoder_v/ensemble |
19 | 0–127 | continuous | ||
/vocoder_v/master_tune |
20 | 0–127 | continuous | ||
/vocoder_v/chord |
34 | 0–127 | continuous | ||
/vocoder_v/mix_dry_voc |
51 | 0–127 | continuous | ||
/vocoder_v/master_volume |
7 | 0–127 | continuous | ||
/vocoder_v/1_50_159 |
35 | 0–127 | continuous | ||
/vocoder_v/2_159_200 |
36 | 0–127 | continuous | ||
/vocoder_v/3_200_252 |
37 | 0–127 | continuous | ||
/vocoder_v/4_252_317 |
38 | 0–127 | continuous | ||
/vocoder_v/5_317_400 |
39 | 0–127 | continuous | ||
/vocoder_v/6_400_504 |
40 | 0–127 | continuous | ||
/vocoder_v/7_504_635 |
41 | 0–127 | continuous | ||
/vocoder_v/8_635_800 |
42 | 0–127 | continuous | ||
/vocoder_v/9_800_1008 |
43 | 0–127 | continuous | ||
/vocoder_v/10_1008_1270 |
44 | 0–127 | continuous | ||
/vocoder_v/11_1270_1600 |
45 | 0–127 | continuous | ||
/vocoder_v/12_1600_2015 |
46 | 0–127 | continuous | ||
/vocoder_v/13_2015_2504 |
47 | 0–127 | continuous | ||
/vocoder_v/14_2504_3200 |
48 | 0–127 | continuous | ||
/vocoder_v/15_3200_4032 |
49 | 0–127 | continuous | ||
/vocoder_v/16_4032_5080 |
50 | 0–127 | continuous | ||
/vocoder_v/voice |
21 | 0–127 | continuous | ||
/vocoder_v/attack |
22 | 0–127 | continuous | ||
/vocoder_v/release |
23 | 0–127 | continuous | ||
/vocoder_v/sample_hold |
27 | 0–127 | continuous | ||
/vocoder_v/hf_mode |
29 | 0–127 | continuous | ||
/vocoder_v/level |
30 | 0–127 | continuous | ||
/vocoder_v/synth |
24 | 0–127 | continuous | ||
/vocoder_v/shift |
25 | 0–127 | continuous | ||
/vocoder_v/width |
26 | 0–127 | continuous | ||
/vocoder_v/patch_bay |
28 | 0–127 | continuous | ||
/vocoder_v/hiss_release |
31 | 0–127 | continuous | ||
/vocoder_v/balance |
33 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /vocoder_v/note/on <note> <velocity>, /vocoder_v/cc/<number> <value>, /vocoder_v/pitchbend <0-16383>, /vocoder_v/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.