Arturia ARP 2600 V3: MIDI CC, NRPN and OSC map¶
The Arturia ARP 2600 V3 as named OSC addresses — 118 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Arturia ARP 2600 V3 |
|---|---|
| Vendor | Arturia |
| OSC prefix | /arp_2600_v3 |
| Source | 🎛️ Derived from an Electra One community preset |
| Revision | per Electra preset |
| Upstream | electra-preset |
| Driver file | devices/arturia/arp_2600_v3.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/arturia/arp_2600_v3.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as arp_2600_v3: ask “what can the Arturia ARP 2600 V3 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (118)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/arp_2600_v3/coarse_tune |
2 | 0–127 | continuous | ||
/arp_2600_v3/fine_tune |
3 | 0–127 | continuous | ||
/arp_2600_v3/sync |
5 | 0–127 | continuous | ||
/arp_2600_v3/range |
4 | 0–127 | continuous | ||
/arp_2600_v3/inv_saw |
6 | 0–127 | continuous | ||
/arp_2600_v3/1_kb_cv |
8 | 0–127 | continuous | ||
/arp_2600_v3/2_s_h_out |
9 | 0–127 | continuous | ||
/arp_2600_v3/3_adsr |
10 | 0–127 | continuous | ||
/arp_2600_v3/4_osc_2_sine |
11 | 0–127 | continuous | ||
/arp_2600_v3/coarse_tune |
12 | 0–127 | continuous | ||
/arp_2600_v3/fine_tune |
13 | 0–127 | continuous | ||
/arp_2600_v3/pulse_width |
56 | 0–127 | continuous | ||
/arp_2600_v3/range |
14 | 0–127 | continuous | ||
/arp_2600_v3/inv_saw |
15 | 0–127 | continuous | ||
/arp_2600_v3/1_kb_cv |
16 | 0–127 | continuous | ||
/arp_2600_v3/2_s_h_out |
17 | 0–127 | continuous | ||
/arp_2600_v3/3_adsr |
18 | 0–127 | continuous | ||
/arp_2600_v3/4_vco_1_sqr |
19 | 0–127 | continuous | ||
/arp_2600_v3/pwm_noise |
20 | 0–127 | continuous | ||
/arp_2600_v3/coarse_tune |
21 | 0–127 | continuous | ||
/arp_2600_v3/fine_tune |
22 | 0–127 | continuous | ||
/arp_2600_v3/pulse_width |
57 | 0–127 | continuous | ||
/arp_2600_v3/range |
23 | 0–127 | continuous | ||
/arp_2600_v3/inv_saw |
24 | 0–127 | continuous | ||
/arp_2600_v3/coarse_tune |
25 | 0–127 | continuous | ||
/arp_2600_v3/2_noise_gen |
26 | 0–127 | continuous | ||
/arp_2600_v3/3_adsr |
27 | 0–127 | continuous | ||
/arp_2600_v3/4_vco_2_sine |
28 | 0–127 | continuous | ||
/arp_2600_v3/pw_vco2_tri |
29 | 0–127 | continuous | ||
/arp_2600_v3/frequency |
30 | 0–127 | continuous | ||
/arp_2600_v3/fine |
31 | 0–127 | continuous | ||
/arp_2600_v3/resonance |
43 | 0–127 | continuous | ||
/arp_2600_v3/notch |
33 | 0–127 | continuous | ||
/arp_2600_v3/type |
34 | 0–127 | continuous | ||
/arp_2600_v3/1_ring_mod |
35 | 0–127 | continuous | ||
/arp_2600_v3/2_vco1_sqr |
36 | 0–127 | continuous | ||
/arp_2600_v3/3_vco2_pulse |
37 | 0–127 | continuous | ||
/arp_2600_v3/4_vco3_saw |
38 | 0–127 | continuous | ||
/arp_2600_v3/5_noise |
39 | 0–127 | continuous | ||
/arp_2600_v3/1_kb_cv |
40 | 0–127 | continuous | ||
/arp_2600_v3/2_adsr |
41 | 0–127 | continuous | ||
/arp_2600_v3/3_vco2_sine |
42 | 0–127 | continuous | ||
/arp_2600_v3/global_volume |
51 | 0–127 | continuous | ||
/arp_2600_v3/1_vcf |
52 | 0–127 | continuous | ||
/arp_2600_v3/2_ring_mod |
53 | 0–127 | continuous | ||
/arp_2600_v3/1_ar |
54 | 0–127 | continuous | ||
/arp_2600_v3/2_lin_adsr |
55 | 0–127 | continuous | ||
/arp_2600_v3/attack |
44 | 0–127 | continuous | ||
/arp_2600_v3/attack |
45 | 0–127 | continuous | ||
/arp_2600_v3/attack |
46 | 0–127 | continuous | ||
/arp_2600_v3/attack |
47 | 0–127 | continuous | ||
/arp_2600_v3/attack |
48 | 0–127 | continuous | ||
/arp_2600_v3/attack |
0 | 0–127 | continuous | ||
/arp_2600_v3/attack |
49 | 0–127 | continuous | ||
/arp_2600_v3/env_trigger |
50 | 0–127 | continuous | ||
/arp_2600_v3/mix_1_2 |
70 | 0–127 | continuous | ||
/arp_2600_v3/mix_3_4 |
71 | 0–127 | continuous | ||
/arp_2600_v3/mix_5_6 |
72 | 0–127 | continuous | ||
/arp_2600_v3/mix_7_8 |
73 | 0–127 | continuous | ||
/arp_2600_v3/link_3_4 |
74 | 0–127 | continuous | ||
/arp_2600_v3/link_5_6 |
75 | 0–127 | continuous | ||
/arp_2600_v3/lag_1_2 |
77 | 0–127 | continuous | ||
/arp_2600_v3/lag_3_4 |
78 | 0–127 | continuous | ||
/arp_2600_v3/lag_5_6 |
79 | 0–127 | continuous | ||
/arp_2600_v3/lag_7_8 |
80 | 0–127 | continuous | ||
/arp_2600_v3/link_7_8 |
76 | 0–127 | continuous | ||
/arp_2600_v3/ext_audio |
81 | 0–127 | continuous | ||
/arp_2600_v3/amt_env_follow |
82 | 0–127 | continuous | ||
/arp_2600_v3/1_vco1_saw |
83 | 0–127 | continuous | ||
/arp_2600_v3/2_vco2_sine |
84 | 0–127 | continuous | ||
/arp_2600_v3/frequency |
63 | 0–127 | continuous | ||
/arp_2600_v3/level |
65 | 0–127 | continuous | ||
/arp_2600_v3/level |
66 | 0–127 | continuous | ||
/arp_2600_v3/sync |
67 | 0–127 | continuous | ||
/arp_2600_v3/rate |
68 | 0–127 | continuous | ||
/arp_2600_v3/1_vcf |
58 | 0–127 | continuous | ||
/arp_2600_v3/2_vca |
59 | 0–127 | continuous | ||
/arp_2600_v3/reverb_l |
60 | 0–127 | continuous | ||
/arp_2600_v3/reverb_r |
61 | 0–127 | continuous | ||
/arp_2600_v3/pan |
62 | 0–127 | continuous | ||
/arp_2600_v3/sync |
69 | 0–127 | continuous | ||
/arp_2600_v3/speed |
121 | 0–127 | continuous | ||
/arp_2600_v3/delay |
117 | 0–127 | continuous | ||
/arp_2600_v3/vibrato_depth |
118 | 0–127 | continuous | ||
/arp_2600_v3/1 |
85 | 0–127 | continuous | ||
/arp_2600_v3/2 |
86 | 0–127 | continuous | ||
/arp_2600_v3/3 |
87 | 0–127 | continuous | ||
/arp_2600_v3/4 |
88 | 0–127 | continuous | ||
/arp_2600_v3/sync |
119 | 0–127 | continuous | ||
/arp_2600_v3/clock_rate |
122 | 0–127 | continuous | ||
/arp_2600_v3/5 |
89 | 0–127 | continuous | ||
/arp_2600_v3/6 |
90 | 0–127 | continuous | ||
/arp_2600_v3/7 |
91 | 0–127 | continuous | ||
/arp_2600_v3/8 |
92 | 0–127 | continuous | ||
/arp_2600_v3/9 |
93 | 0–127 | continuous | ||
/arp_2600_v3/10 |
94 | 0–127 | continuous | ||
/arp_2600_v3/11 |
95 | 0–127 | continuous | ||
/arp_2600_v3/12 |
96 | 0–127 | continuous | ||
/arp_2600_v3/13 |
97 | 0–127 | continuous | ||
/arp_2600_v3/14 |
98 | 0–127 | continuous | ||
/arp_2600_v3/15 |
99 | 0–127 | continuous | ||
/arp_2600_v3/16 |
100 | 0–127 | continuous | ||
/arp_2600_v3/1 |
101 | 0–127 | continuous | ||
/arp_2600_v3/2 |
102 | 0–127 | continuous | ||
/arp_2600_v3/3 |
103 | 0–127 | continuous | ||
/arp_2600_v3/4 |
104 | 0–127 | continuous | ||
/arp_2600_v3/5 |
105 | 0–127 | continuous | ||
/arp_2600_v3/6 |
106 | 0–127 | continuous | ||
/arp_2600_v3/7 |
107 | 0–127 | continuous | ||
/arp_2600_v3/8 |
108 | 0–127 | continuous | ||
/arp_2600_v3/9 |
109 | 0–127 | continuous | ||
/arp_2600_v3/10 |
110 | 0–127 | continuous | ||
/arp_2600_v3/11 |
111 | 0–127 | continuous | ||
/arp_2600_v3/12 |
112 | 0–127 | continuous | ||
/arp_2600_v3/13 |
113 | 0–127 | continuous | ||
/arp_2600_v3/14 |
114 | 0–127 | continuous | ||
/arp_2600_v3/15 |
115 | 0–127 | continuous | ||
/arp_2600_v3/16 |
116 | 0–127 | continuous |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /arp_2600_v3/note/on <note> <velocity>, /arp_2600_v3/cc/<number> <value>, /arp_2600_v3/pitchbend <0-16383>, /arp_2600_v3/program_change <n>.
Limitations¶
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.