Abildgard Droid-3: MIDI CC, NRPN and OSC map¶
The Abildgard Droid-3 as named OSC addresses — 32 CC — ready to use from Claude (MCP), SuperCollider, Sonic Pi, TouchDesigner or any OSC app via osc-bridge.
| Device | Abildgard Droid-3 |
|---|---|
| Vendor | Abildgard |
| OSC prefix | /droid_3 |
| Source | 📦 Derived from MIDI Guide (community CC/NRPN data) |
| Firmware | unknown |
| Revision | per pencilresearch canonical CSV |
| Upstream | pencilresearch |
| Data licence | CC-BY-SA-4.0 — MIDI Guide (https://midi.guide) by Pencil Research and contributors |
| Driver file | devices/abildgard/droid_3.json |
Not tested on the device yet
This driver comes from documentation or community data and has not been checked on real hardware. If you own one, a quick test and a pull request promoting it helps everyone — see CONTRIBUTING.
How do you control it?¶
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device devices/abildgard/droid_3.json --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as droid_3: ask “what can the Abildgard Droid-3 do?” and it reads this map with list_routes. See the MCP guide.
MIDI CC and NRPN parameters (32)¶
| OSC address | CC | NRPN (MSB/LSB) | Range | Nature | Section |
|---|---|---|---|---|---|
/droid_3/general/value_interpreter_mode |
16 | 0–3 | continuous | General | |
/droid_3/general/mixing_structure |
20 | 0–127 | continuous | General | |
/droid_3/filters/filter_cutoff_1 |
21 | 0–127 | continuous | Filters | |
/droid_3/filters/filter_cutoff_2_filter_width |
22 | 0–127 | continuous | Filters | |
/droid_3/arpeggiator/arpeggio_speed |
23 | 0–127 | continuous | Arpeggiator | |
/droid_3/general/dco2_and_env2_step_amount |
24 | 0–7 | continuous | General | |
/droid_3/general/various_modes |
25 | 0–127 | continuous | General | |
/droid_3/oscillators/dco1_waveform |
26 | 0–31 | continuous | Oscillators | |
/droid_3/oscillators/dco1_pw |
27 | 0–127 | continuous | Oscillators | |
/droid_3/oscillators/dco1_offset |
28 | 0–127 | continuous | Oscillators | |
/droid_3/oscillators/dco1_amplitude |
29 | 0–127 | continuous | Oscillators | |
/droid_3/oscillators/dco1_octave |
30 | 0–63 | continuous | Oscillators | |
/droid_3/oscillators/dco1_frequency |
31 | 0–127 | continuous | Oscillators | |
/droid_3/oscillators/dco2_waveform |
102 | 0–31 | continuous | Oscillators | |
/droid_3/oscillators/dco2_pw |
103 | 0–127 | continuous | Oscillators | |
/droid_3/oscillators/dco2_offset |
104 | 0–127 | continuous | Oscillators | |
/droid_3/oscillators/dco2_amplitude |
105 | 0–127 | continuous | Oscillators | |
/droid_3/oscillators/dco2_octave |
106 | 0–63 | continuous | Oscillators | |
/droid_3/oscillators/dco2_frequency |
107 | 0–127 | continuous | Oscillators | |
/droid_3/envelopes/env1_attack |
108 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env1_attack_level |
109 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env1_decay |
110 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env1_sustain_level |
111 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env1_release |
112 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env1_offset |
113 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env2_attack |
114 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env2_attack_level |
115 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env2_decay |
116 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env2_sustain_level |
117 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env2_release |
118 | 0–127 | continuous | Envelopes | |
/droid_3/envelopes/env2_offset |
119 | 0–127 | continuous | Envelopes | |
/droid_3/general/midi_channel |
120 | 0–15 | continuous | General |
Performance MIDI¶
Notes, pitch bend and any CC are also available: /droid_3/note/on <note> <velocity>, /droid_3/cc/<number> <value>, /droid_3/pitchbend <0-16383>, /droid_3/program_change <n>.
Limitations¶
CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.